617900
12
Zoom out
Zoom in
Previous page
1/64
Next page
12 TASCAM HS-P82
Left side panel
f Cord holder
Use this to hold the cord of the included TASCAM PS-
1225L adaptor designed for this unit to prevent the plug
from becoming disconnected.
g DC IN connector
Connect the included TASCAM PS-1225L adaptor
designed for this unit here.
h COMPACT FLASH SLOT 2 (CF 2)
Insert a CF card here.
j COMPACT FLASH SLOT 1 (CF 1)
Insert a CF card here.
k EXT DC IN connector
Connect external DC power here. Use a supply with an
output voltage of DC 11-16 and an output current of 2A
or more. The connector is XLR-4-32 (1: –, 2: NC, 3:
NC, 4: +).
l DIGITAL I/O connector
Use this D-sub 25-pin AES3-2003/IEC60958-4 (AES/
EBU) format connector for digital audio input and
output. Transmission occurs at double speed when the
sampling frequency is 88.2/96 kHz and at quad speed
when 176.4/192 kHz. The digital input section includes
a sampling rate converter that is compatible with 32–216
kHz sampling frequencies.
; CASCADE/WORD/VIDEO (IN 2) connector
Use this BNC connector to input cascade, word clock
(44.1, 48, 88.2, 96, 176.4 or 192 kHz as well as 48 kHz
pull-up or pull-down) or video reference (NTSC/PAL
black burst, HDTV Tri-Level) signals.
z CASCADE/WORD (OUT 2) connector
Use to output word sync signals (44.1, 48, 88.2, 96,
176.4 or 192 kHz as well as 48 kHz pull-up or pull-
down).
x TIME CODE/DIGITAL (OUT 1) connector
Use this BNC connector to output SMPTE time code.
Internal settings can be changed to allow AES3-2003/
AES-3id-2001 (AES/EBU) format digital audio signal
to be output. Transmission occurs at double speed when
the sampling frequency is 88.2/96 kHz and at quad
speed when 176.4/192 kHz.
c TIME CODE (IN 1) connector
Use this BNC connector to input SMPTE time code.
v USB connector
Use a USB 2.0 cable to connect this unit to a computer.
Driver software is not necessary. The computer
recognizes each of the CF card slots in this unit as a
unique mass storage device, so two separate devices
appear on the computer if both slots contain cards. Use
the USB connection to transfer audio files on the CF
cards in this unit to the computer.
b KEYBOARD connector
Connect an IBM PC-compatible keyboard with a PS/2
interface, and use it to input project, scene, and channel
names, for example. By default, the unit is set to use a
US keyboard. When using a Japanese keyboard, since
the key allocation is different, change the setting on the
PREFERENCES
page of the
SYSTEM
SETUP
screen.
2 − Names and functions of parts
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info