617905
45
Zoom out
Zoom in
Previous page
1/72
Next page
TASCAM HS-8 45
Playback settings (PLAY SETUP)
Use this screen to make settings related to playback.
GENERAL page
Play Mode
Set how the playback of takes is handled.
One Take: Only the currently selected take is played back.
All Take: All the takes in the currently loaded folder are
played back.
(Default setting:
One
Take
)
Repeat Mode
Turn repeat playback ON and OFF.
(Default setting: OFF)
CONTROL page
Auto Cue
Turn the auto cue function ON or OFF (Default setting:
OFF). If auto cue is ON, whenever a take is changed or
loaded, the unit will enter playback standby at the point
where sound first starts in the take.
If no sound is detected before the end of the take, the unit
pauses at the start of the take. To set the auto cue start
point detection level, touch the knob area and use the
DATA dial to change the value.
Options: –72 dB, –66 dB, –60 dB, –54 dB (default value),
–48 dB, –42 dB, –36 dB, –30 dB, –24 dB
Auto Ready
Turn the auto ready function ON or OFF. If auto ready
is ON, when playback of a take completes the unit
automatically stops a the beginning of the next take.
(Default setting: OFF)
Inc. Play
Turn the incremental play function ON or OFF. When
incremental play is ON, press the PLAY key during
playback to move to the beginning of the next take and
continue playing, or press the STOP (RETAKE) key during
playback to move to the beginning of the next take and
pause playback. (Default setting: OFF)
Sync and time code settings (SYNC T/C)
Use the
SYNC
T/C
screen to make synchronization and
time code settings. This screen has five pages:
CLOCK
,
SYNC
,
T/C
,
SETUP
and
I/O
. Touch the tabs at the bottom of
the screen to open the corresponding page.
CLOCK page
View various clock status information and select the clock
used for synchronization.
STATUS
The top section shows the project sampling frequency
and the clock synchronization status.
The bottom section shows digital input signal status for
pairs of channels in the format
CHx-xDIN
(
x-x
shows the
channels), as follows.
Digital input signal status Display
When locked
Locked
(xx.xxx
kHz)
When sampling frequency
conversion (FSConvert) is
ON
Locked
(xx.xxx
kHz
FsCnv)
When unlocked
Unlocked
(xx.xxx
kHz)
When there is no signal
Unlocked
(No
signal)
When there is no audio
signal
Not
Audio
When Cbit information is
not professional
Not
Professional
When other Cbit
information and the
actual operation mode are
different
Unmatched
Cbit
6 – Internal Settings and Operations
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info