617905
30
Zoom out
Zoom in
Previous page
1/72
Next page
30 TASCAM HS-8
If the take is not currently in the selected project, a
Selected take is in another project
pop-up
message appears.
Message shown when the take is inside the project
Message shown when the take is outside the project
5 Touch the
OK
button.
When loading completes, the Home Screen reopens.
Disabling input monitoring
Turn input monitoring OFF for the channels (tracks) that
you are playing back. If input monitoring is ON for a
channel, sound will be input through the corresponding
input connector.
1 Touch the REC/MON button on the Home Screen to
open the REC/MON screen.
2 Touch the input monitoring buttons for the
channels that you want to play to turn input
monitoring OFF.
NOTE
You can also access the input monitoring buttons by pressing the
MENU key to open the MENU screen or by touching the CHANNEL
SETUP button to open the CHANNEL SETUP screen.
Start playback
Press the PLAY key.
Press the PAUSE key to pause playback.
Press the PLAY key again to resume playback.
Press the STOP (RETAKE) key to stop playback.
Press the  and ¯ keys briefly to change the take.
While pressing the SHIFT key, press the  (MARK Â)
and ¯ (MARK ¯) keys to move between marks.
Press and hold the Ô ( ) or ( ) keys to
search backward or forward during playback. While
pressing the SHIFT key, press and hold a Ô ( ) or
( ) key to search at high speed.
NOTE
On the PLAY SETUP screen, you can set whether only the
currently selected take is played or whether all the takes within
the current folder are played. You can also enable and disable
repeat playback. (See “Playback settings (PLAY SETUP)” on page
45.)
Playback functions can also be used through parallel control.
Mixing the playback sound
Use the internal mixer function to mix the recorded tracks
into stereo and output them to the ANALOG OUTPUTS L/A,
R/B (XLR), and DIGITAL OUTPUT L-R (XLR) connectors.
1 Press the HOME key on the front panel to open the
Home Screen.
2 Touch the
PAN/LEVEL
button on the Home Screen to
open the
PAN/LEVEL
page.
PAN knobs: Use these to adjust the left-right position
sent to the stereo bus. Touch a knob and then
adjust its value using the DATA dial.
2Mix LVL knob: Use these to adjust the level sent to
the stereo bus. Touch a knob and then adjust its
value using the DATA dial.
NOTE
When in solo mode, PAN or 2Mix LVL knob cannot be selected.
4 − Recording and Playback
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info