617905
28
Zoom out
Zoom in
Previous page
1/72
Next page
28 TASCAM HS-8
See “Channel Settings (CHANNEL SETUP)” on page 50
for details about making settings on
CHANNEL
SETUP
screens.
Monitor the input
Touch the PAN/LEVEL button on the Home Screen to
open the
PAN/LEVEL
page or open a
CHx
SETUP
screen (“
x
is the channel) where you can adjust the
PAN
and
2Mix
LVL
knobs. After these adjustments to all the channels,
the mixed sound is sent to the outputs for headphones
and external speakers and can be monitored.
When in solo mode,
PAN
and
2MixLVL
knobs cannot be
selected.
Home Screen PAN/LEVEL page
CHx SETUP screen
NOTE
If the sampling frequency is set to 44.1 or 48 kHz, you can simulta-
neously record the stereo mix of the channels with their levels and
pan positions adjusted.
Make a recording
Press the REC key to put the unit into recording standby.
When in recording standby, press the PLAY key to start
recording.
The transport status display at the top left of the Home
Screen changes into the recording status display and part
of the background of the Home Screen becomes red,
indicating that the unit is recording. The time counter
starts at the same time.
If you press the REC key while recording, recording to the
current file stops, but recording continues on a new file.
NOTE
If you press the REC key less than 4 seconds after beginning
recording, the unit will not start recording a new take.
Depending on the Mono le recording folder settings, the
required time could be even longer. (See “Folder where les are
saved in mono mode” on page 33.)
Depending on other conditions, recording of a new take
might not be possible when the REC button is pressed during
recording. (See “Recording operation limitations” below.)
Recording is not possible if any of the following conditions
apply. Change the recording folder.
The folder contains 999 takes
The number at the end of the take name has reached 999
The remaining recording time indicator on the Home Screen
shows “Rec Limit”. (See “Recording operation limitations” on
page 29.)
Recording functions (except retaking) can also be used
through parallel control.
Stop recording
Press the STOP (RETAKE) key to stop recording.
Retake a recording
Press the STOP (RETAKE) key while pressing and holding
the SHIFT key to erase the last recorded take.
If a 2Mix take was recorded simultaneously, it is also
erased.
If the REC key was pressed during recording to record
multiple consecutive takes, retaking from the beginning
of any of the recordings is possible. Each time the STOP
(RETAKE) key is pressed while pressing and holding the
SHIFT key, the previous take is selected for retaking.
4 − Recording and Playback
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-8 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info