617904
14
Zoom out
Zoom in
Previous page
1/156
Next page
14
TASCAM HS-2000
2 − Names and functions of parts
@GROUND terminal
When using a TASCAM RC-HS32PD or RC-HS20PD
remote control (sold separately), depending on the
operating environment, the color display might flicker
or noise might be heard when monitoring. If this
occurs, use the GROUND terminal to ground the unit.
(No wire is provided for this use, so please prepare
your own.)
PARALLEL connector
The PARALLEL connector on the rear panel allows
external control of this unit.
You can also connect a TASCAM RC-SS20. (Connect to the
RC-SS20’s REMOTE 1 connector.)
The pin assignments are as follows.
Pin
No.
Normal
TASCAM
RC-SS20
PonMode
I/O
1 GND GND
2 PLAY FLASH 1 I
3 STOP FLASH 2 I
4 RECORD FLASH 3 I
5 SKIP FWD FLASH 4 I
6 SKIP BWD FLASH 5 I
7
(
Reserved
)
STOP I
8 FADER_START FADER_START I
9 TALLY_BC_STOP TALLY_BC_STOP O
10
TALLY_PAUSE/TALLY_BC_
PAUSE
TALLY_PAUSE/TALLY_BC_
PAUSE
O
11 TALLY_RECORD RESERVED O
12 TALLY_STOP TALLY_STOP O
13 TALLY_PLAY TALLY_PLAY O
14
REMOTE_SELECT,
H or Open
REMOTE_SELECT, L I
15 PAUSE FLASH 6 I
16
(
Reserved
)
FLASH 7 I
17 AUX1, FF FLASH 8 I
18 AUX2, REW FLASH 9 I
19 AUX3, MARK FLASH 10 I
20
(
Reserved
)
FLASH_PAGE I
21 TALLY_BC_STANDBY TALLY_BC_STANDBY O
22
TALLY_CF1/TALLY_BC_
CM
TALLY_CF1/TALLY_BC_
CM*
O
23 TALLY_ONLINE TALLY_ONLINE O
24
TALLY_CF2/TALLY_BC_
END
TALLY_CF2/TALLY_BC_
END**
O
25 +5V*** +5V***
I: Command input for transport control
Internal circuit, +5V pull-up
Operates with low commands of 50 msec or more
O: Command output, for tally output
The internal circuit is open collector (10Ω output impedance)
Outputs low commands when operating
20V maximum voltage, 35mA maximum current
*With an RC-SS20, assigned to the CF indicator
**With an RC-SS20, assigned to the CD indicator
***+5V: 50mA maximum supplied current
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2000 in the language / languages: English as an attachment in your email.

The manual is 12,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info