617906
93
Zoom out
Zoom in
Previous page
1/128
Next page
TASCAM HS-20
93
10 – Internal settings
DAYLIGHT SAVING TIME SETUP screen
Use this screen to set the internal clock to use daylight
saving time during the set period.
Daylight Saving Mode
Set whether or not the HS-20 follows Daylight Saving Time
changes.
o Disable (default): The HS-20 does not follow DST changes.
o Enable: The HS-20 follows DST changes.
Explanation Values
START
default
END
default
Month
Sets the start and
end months for
Daylight Saving
Time.
Jan, Feb, Mar, Apr,
May, Jun, Jul, Aug,
Sep, Oct, Nov, Dec
Mar Nov
Week
Sets the start
and end week for
Daylight Saving
Time
1st, 2nd, 3rd, 4th,
5th, Last
2nd 1st
Day of
Week
Sets the start
and end day for
Daylight Saving
Time
Sun, Mon, Tue,
Wed, Thu, Fri, Sat
Sun Sun
Time
Sets the start
and end hour for
Daylight Saving
Time
00:00-24:00
(01:00/step)
02:00 02:00
To make the above settings, touch a knob to select it,
making the background of the parameter yellow, and turn
the DATA dial to set it.
NOTE
This screen shows the local time setting, not Coordinated
Universal Time (UTC).
Offset Time
This is the amount of time that the clock is advanced during
daylight saving time.
Setting buttons: 30min, 60min
Default: 60min
SNTP SETUP screen
Use the screen to set the SNTP function that allows the unit
to automatically synchronize the date and time with an
Internet time server.
STATUS
This shows the current status of the system in regards to
SNTP.
o Current Time: This shows the current date and time used
by the unit.
o Last Sync Time: This shows the time the unit last synchro-
nized with an NTP server.
o SNTP Connection: This shows the status of connection
with an NTP server.
Message Meaning
Successful update Time updated successfully
Successful update with
skew
Delay occurred but time was updated
Starting Up The connection is starting up
Accessing Server Connecting to server
Disabled SNTP function is disabled
Waiting for Network
Waiting to establish network
connection
Server Name not found
The server name could not be found
from a DNS server
Server Name found
The server name was found from a
DNS server
Server connection failed
There was no response from the
server
Server refusing connections
The server responded, but it is
refusing additional connections, so
choosing a different SNTP server
would be good.
SNTP MODE
o Disable (default): The SNTP function is not used.
o Enable: The SNTP function is used.
NOTE
To use the SNTP function, you must make the following NTP
Server setting and DNS server setting on the NETWORK
page of the REMOTE SETUP screen.
NTP Server
Shows the NTP server name (32 characters or less)
o Default: ntp.nict.jp
Touch this area to open the NTP SERVER name input screen
shown below.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info