617906
91
Zoom out
Zoom in
Previous page
1/128
Next page
TASCAM HS-20
91
10 – Internal settings
When an RC-HS20PD is connected, the RC-HS20PD fader
level is shown.
If one is not connected, this value is fixed at 0dB.
Level meter settings (METER SETUP)
Make level meter settings on this screen.
Metering Point
Set whether the meters show the signal before or after the
faders.
Meters show the signal before the faders
(default).
Meters show the signal after the faders.
In this case, the button appears light blue.
Ref. Level Line
Touch to turn the reference level line that appears on the
level meter ON (default) or OFF. (Default: ON)
Reference level line display ON
Over Level
Use this to set the level at which the overload indicator
lights. The peak indication level is this amount below the
maximum level (full scale).
Touch this knob and use the DATA dial to adjust the level.
Settings: –0.20 dB (default), –0.17 dB, –0.13 dB, –0.10 dB,
–0.06 dB, –0.03 dB.
This setting is reflected in the Audio Over setting of the Auto
Mark item on the OPTIONS page of the REC SETUP screen.
Peak Hold Time
Use this to set the peak hold time.
Touch this knob and use the DATA dial to adjust the time.
Settings: 0 sec, 1 sec, 2 sec (default) and inf (hold forever).
Release Time
Use this to set the release time.
Touch this knob and use the DATA dial to adjust the time.
Settings: Slow, Normal (default) and Fast
NOTE
If you press the EXIT/CANCEL [PEAK CLEAR] key when the
Home Screen is open, the peak hold display resets.
System settings (SYSTEM SETUP)
Make system settings on this screen.
The SYSTEM SETUP screen has 4 pages: PREFERENCES, ANALOG
Ref LVL ADJUST and Backup/Preset and CLOCK ADJUST.
Touch the tabs at the bottom of the screen to open the corre-
sponding page.
PREFERENCES page
Set system preferences on this page.
KBD Type
Set the connected keyboard type to either US for English-
language keyboards or JPN for Japanese keyboards.
Setting buttons: US, JPN (default)
Digital Ref. Level
Set the reference level for digital inputs and outputs to a
number of decibels below the maximum level (full scale).
Setting buttons: –9dB, –14dB, –16dB, –18dB,
–20dB (default)
Screen Saver
The screen saver function can be set to turn the display off if
none of the following operations occur for 10 minutes.
After the display turns off, any of the following operations
will cause the display to turn on and light with the set
brightness.
o Touch panel operation
o Front panel key use
o Media connection
Setting buttons: OFF (default.), ON
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info