617907
97
Zoom out
Zoom in
Previous page
1/132
Next page
TASCAM HS-2 97
Video Resolve
When slaving this unit to a VCR, video sync signals might
be used instead of word sync signals for the common
standard clock. In the same way as with word sync
signals, you can select whether the video clock is followed
(synchronizing the beginning of time code frames with
video signal frame edges) or it is independent from the
frame clock.
This must be turned
ON
to accurately control this unit from
a video editor.
ON
(default): Time code frame edges synchronized with
video signal frame edges
OFF
: Independent from video frame clock
ETHERNET page
Perform settings related to the ETHERNET communication.
STATUS
Shows the MAC Address of this unit and the current IP
Address.
IP MODE
This button is to enable or disable all network activity.
Setting buttons:
Disable
(Disabled, Default),
Enable
(Enabled)
IP SETUP
Selects how the unit's IP address is specified
In DHCP mode, if a DHCP server exists on the same LAN
network as the unit, the IP address, Subnet Mask and
Default Gateway settings are automatically obtained.
In the STATIC settings, IP Address, Subnet Mask and
Default Gateway must be set manually.
Setting buttons:
DHCP
,
STATIC
(default)
LINK SPEED
This button affects how the link speed is determined.
Setting buttons:
Auto
(Default. Negotiates the best possible
link speed according to the network
environment.)
100M
(Operates with a fixed link speed of
100Mbps)
IP Address / Subnet Mask / Default Gateway
Allows setting and display of the specified values to be
used in STATIC IP address mode.
Default: 0. 0. 0. 0.
According to the above
IP SETUP
settings, the display of
this area will change as follows:
When setting DHCP When setting STATIC When touching
Changing the IP Address / Subnet Mask / Default
Gateway settings
Touch the applicable area on the
ETHERNET
page of the
REMOTE SETUP
screen to display each setting adjustment
screen.
Numbers are three digits. (For those of two digits or
less, you do not need to input
0
first.)
The first digits are selected after the screen is displayed.
Touch the first number button after entering the
selection mode to set that only the numbers of the
buttons touched are input. Subsequently, the numbers
are input using the number pad.
Touch the dot (“.”) button to move the selection to the
next number.
Example)
W h e n d i s -
played on the
screen
192. 168. 1. 1
Input 1234
234. 168. 1. 1
(The first “1” is pushed
forward.)
Input “ . ”
192. 168. 1. 1
10–Internal settings
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info