617907
18
Zoom out
Zoom in
Previous page
1/132
Next page
18 TASCAM HS-2
7 AES31 File name (button)
This shows the current active AES31 File name (file of
AES31 editing information).
A
*
appears when the timeline has not been saved
after editing (including the addition and removal of
session editing marks)
Touch this area to open a pull-down menu.
START TIME EDIT button
This opens the
START TIME
screen where you can
set the timeline mode starting time. This can only be
selected when stopped.
REBUILD button
This performs a REBUILD (file rescan) when files may
have been deleted or modified from outside the HS-2
(e.g. via FTP).
This can only be selected when stopped.
SAVE button
Save the contents of the timeline.
This can only be selected when stopped.
SAVE AS button
This attaches a name to and saves the content of the
timeline.
This can only be selected when stopped.
(See “Saving AES31 editing information on page 49.)
CREATE AES31 button
This displays the
AES31 NAME
screen to create a new
AES31 file.
This can only be selected when stopped.
(See Creating new AES31 editing information” on
page 50.)
IMPORT ALL TAKES button
This imports all takes into the current session.
This can only be selected when stopped.
(See “Importing all the takes” on page 51.)
8 Input monitoring indicators
The indicators at the left end of the level meters show
the status of input monitoring.
The background colors of the indicators stands for the
following depending on the input monitoring.
Playlist Mode
Timeline Mode/
Take Mode
MON OFF
MON ON
9 Level meters
The input signal level is shown when the input
monitor is on, on recording standby, or recording.
Each channel also has an overload indicator at its right
end that appears red when the input overloads.
During playback, the playback level of the track is
shown if input monitoring is set to OFF.
When the input source is set to a digital input, but
there is no input signal or if the input signal differs
from the internal setting, the channel meter display
area appears gray and one of the following messages
appears.
Display Meaning
D-IN NO SIGNAL
No input signal
D-IN UNLOCK
Input signal is not synchro-
nized with the system
D-IN NOT AUDIO
Cbit information of the input
signal is not audio
D-IN Cbit ERROR
Other input signal Cbit infor-
mation differs from the actual
operation mode
DIN NO SIGNAL
shown
The following settings can be made for the display of
the level meters on the
METER SETUP
screen from the
MENU
screen.
Metering point
Peak hold time
Release time
Overload indicator peak level
Reference level line display on/off
2−Names and functions of parts
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info