490770
29
Zoom out
Zoom in
Previous page
1/56
Next page
TASCAM DR-680
29
5 Use this screen to set input levels. Use the 16
keys to select the input channels that you want to
adjust.
6 Use the VALUE knob to adjust the input levels in
a range of ±32 dB (default value: 0).
CAUTION
When recording with microphones, please pay attention
to the following points.
Adjust the input level so that distortion does not occur
at the input stage. If distortion does occur at the input
stage, the channel number to the left of the meter
on the TRIM screen is shown as a light number on a
dark background. In this case, the unit might record
distorted sound even if the overload indicator for the
meter has not appeared.
When adjusting the input level, at first, set the MIC
GAIN switch to LOW and adjust the input level on
the TRIM screen. If the input level is still too low even
when the trim is set to maximum, set the MIC GAIN
switch to HIGH.
TIP
In addition to using the TRIM screen to adjust the
recording levels, try changing the orientation of the
microphones and their distances from the sources
of the sound. The orientation and distance of a
microphone also changes the sound quality.
You can use the limiter function to prevent distortion
when recording even when loud sounds are input.
(See “Using the limiter” on page 32.)
7 Press the REC TRIM or HOME/FUNC key to
return to the Home Screen.
Recording a take
Before starting the following procedures, input
selection and level adjustment for each track should be
completed, and the Home Screen should be open.
1 Press the PAUSE key to start recording standby.
The PAUSE and REC indicators light.
PAUSE indicator
REC indicator
2 Press the REC key to start recording. During
recording, the REC indicator lights, and the
elapsed recording time or remaining recordable
time appear on the display.
NOTE
You can also start recording by pressing the REC key first
without pushing the PAUSE key beforehand.
3 Press the STOP key to stop recording.
Press the PAUSE key to pause recording. When
paused, you can press the REC key again to
restart recording.
NOTE
You can set whether recording continues in the same
take or a new take is created when you start recording
again after pausing. (See “Creation of new takes when
restarting recording” on page 25.)
4 – Recording
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR680 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info