490770
28
Zoom out
Zoom in
Previous page
1/56
Next page
28
TASCAM DR-680
Do not connect an unbalanced dynamic mic to a mic
input when phantom power is being supplied. Doing
so could damage that mic and this unit.
Selecting the inputs for recording to tracks
5 and 6
Tracks 5 and 6 can be used to record either analog mic/
line inputs or the digital input.
1 Press the MENU key to open the
MENU
screen.
2 Use the DATA wheel to select the
I/O
menu item,
and press the ENTER key to open the
I/O
screen.
3 Use the DATA wheel to select the
INPUT
SEL
menu
item, and press the key or ENTER key.
4 Use the DATA wheel to select
ANALOG
(default
value) or
DIGITAL
.
ANALOG
: Record the signals of analog inputs
5 and 6 to tracks 5 and 6.
DIGITAL
: Record the digital input signal to
tracks 5 and 6.
NOTE
If the ST REC item is set to DIN, this setting has no effect.
The unit will operate as though set to ANALOG.
Adjusting the input levels
1 Press the PAUSE key to enable recording
standby. The PAUSE and REC indicators light.
2 Use the 1-6 and MIX keys to turn the record
function ON for tracks that you want to record.
When the record function is ON for a track, an
º appears under its meter on the display.
NOTE
If the file recording mode is set to STEREO, the record
function is turned ON and OFF for channels in pairs.
If the file recording mode is set to 6ch, the record
function cannot be turned ON and OFF for individual
channels.
The record function can only be turned ON/OFF when
record standby is enabled when the unit is stopped
or during playback. It cannot be turned ON/OFF
when record standby is caused by use of the Auto
Rec function or record standby is enabled during
recording.
3 If a mic is connected, set the MIC GAIN switch for
that input to LOW.
NOTE
If an INPUT switch is set to LINE, the corresponding MIC
GAIN switch is disabled.
4 Press the REC TRIM key to open the
TRIM
screen.
4 – Recording
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DR680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DR680 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info