617894
54
Zoom out
Zoom in
Previous page
1/104
Next page
54 TASCAM DP-32
7 - Recorder Functions
Previewing cue points
You can preview playback to check whether it is cued
correctly. This function can be used to preview audio both
before and after the current playback position.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
PREFERENCE
,
and then press the F4 (t) button.
The
PREFERENCE
screen opens.
3. Use the CURSOR (5/b) buttons to select (highlight
blue)
Preview Time
, then use the JOG/DATA dial
to set the preview playback time.
Preview Time:
1 Sec
to
10 Sec
(default:
4 Sec
)
4. After making the setting, press the HOME button
to return to the Home screen.
5. Preview playback before or after the cue point.
To preview after the cue point:
While playback is stopped, hold the PREVIEW button
and press the OUT button to play from the current
point for the preview time, and then return to the
current point and stop.
To preview before the cue point:
While playback is stopped, hold the PREVIEW button
and press the IN button to skip back the preview time
and then play to the current time and stop.
Automatic punching in and out
You can use the punch in/out function to automatically
record between punch-in and punch-out points set in
advance.
When using auto punch in/out recording, playback starts
from the pre-roll point before the punch-in point where
recording starts. Once the punch-out point is reached,
recording ends, but playback continues for the post-roll
time and then stops.
In automatic punch in/out recording, monitoring of the
recording tracks changes as follows.
•
Pre-roll period: Track playback signal + input source
signal
•
Punch in–out interval: Input source signal
•
Post-roll period: Track playback signal + input source
signal
Tracks not armed for recording can be monitored the
entire time.
When using this auto punch in/out function, the above
monitoring changes occur not only during actual
recording, but also in the Rehearsal mode.
In Rehearsal mode, you can simulate auto punch in/out
recording, so you can rehearse your performance and also
check whether the IN and OUT points are set correctly.
You can also use punch in/out in with the repeat function.
By using these functions together, you can repeatedly
rehearse punch in/out recording, or record multiple takes
of the same section, letting the unit work automatically.
After recording multiple takes, you can choose the best
one.
Setting punch-in/out points
There are two ways to set the punch-in/out points.
LAST REC:
This option sets the starting and ending points of the
last recording (or rehearsal) as the punch in and out
points.
IN - OUT:
This option sets the IN and OUT points as the punch-in/
out points. The first of these points will be used as the
punch-in point and the second as the punch-out point.
1. When the recorder is stopped, press the HOME
button to open the Home screen.
2. Press the REC button for the track(s) on which you
want to automatically punch in and out.
3. Press the AUTO PUNCH button to open the
AUTO PUNCH
screen.
4. Use the CURSOR (5/b) buttons to select (highlight
blue)
MODE
,
PREROLL
or
POSTROLL
, and then
use the JOG/DATA dial to set the value.
MODE
:
LAST REC
or
IN-OUT
PREROLL
:
1.0
to
9.9 sec
POSTROLL
:
1.0
to
9.9 sec
After setting
MODE
,
PREROLL
and
POSTROLL
,
press the F4 (t) button to return to the Home screen.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info