617894
53
Zoom out
Zoom in
Previous page
1/104
Next page
TASCAM DP-32 53
7 - Recorder Functions
Repeat playback
Use the repeat playback function to play the same part
again and again.
The repeat playback interval is the audio between the IN
and OUT points.
Setting IN/OUT points
In addition to setting the repeat playback interval, the
IN and OUT points are also used to set track editing
intervals and as the punch-in and punch-out points when
automatically punching in and out. Moreover, these
points are used as the start and end points of the mixed-
down master file when creating a master file.
You can set these points when the unit is recording,
playing back or stopped.
NOTE
The IN and OUT points cannot be set or edited in the
following modes: repeat playback, auto punch and
mastering.
ª
Adding IN/OUT points
Regardless of whether the unit is stopped, playing back
or recording, when the recorder is at the desired position,
press and hold the MARK SET button and press the IN or
OUT button.
The position where you pressed the IN/OUT button is set
as the IN/OUT point and the time is shown on the Home
screen.
ª
Locating IN/OUT points
When stopped or playing back, press the IN or OUT
button.
Using repeat playback
1. Set the IN point and OUT points as the start and
end points of the repeat playback interval, and
then return to the Home screen.
2. Press the REPEAT button.
The
icon appears on the Home screen, and repeat
playback starts.
Repeat icon
After starting from the IN point, when playback
reaches the OUT point, it returns to the IN point and
continues.
Playback continues to repeat between the IN and OUT
points.
3. To end repeat playback, press the REPEAT button,
so that the icon disappears from the Home
screen.
Jumpback playback
Press the JUMPBACK (PREVIEW) button during playback
to move back a set number of seconds and restart
playback.
If you want to hear a passage again during playback,
press the JUMPBACK (PREVIEW) button to go back the
set number of seconds and replay that passage.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
PREFERENCE
,
and then press the F4 (t) button.
The
PREFERENCE
screen opens.
3. Use the CURSOR (5/b) buttons to select (highlight
blue)
Jump Back
, then use the JOG/DATA dial to
set the jumpback time.
Options:
1 Sec
to
10 Sec
,
20 Sec
,
30 Sec
(default:
3 Sec
)
4. After making the setting, press the HOME button
to return to the Home screen.
5. Press the JUMPBACK button during playback to
move back by the time set in step 3.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info