617894
43
Zoom out
Zoom in
Previous page
1/104
Next page
TASCAM DP-32 43
6 - Basic Recording
Peak hold display
Using the peak hold function , you can set how long peak
levels are shown on the level meters on the Home Screen
and other screens.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/
t) buttons to select
PREFERENCE
, and then press
the F4 (t) button.
3. Use the CURSOR (5/b) buttons to select the
Peak Hold
item, and then use the JOG/DATA dial
to change the setting.
Option Function
OFF
(default)
Peak value is not shown.
1 Sec
Peak value is shown for about one
second.
KEEP
In mastering mode, the peak value is
cleared when you locate a new time.
In all other modes, press the
F3 [PEAK
CLEAR] button to clear the peak value.
4. After making the settings, press the HOME button
to return to the Home screen.
TIP
When you are unable to monitor the meters continuously
(when playing, for example), use the
KEEP
setting to check
the highest level so far.
Mixer screen settings
Press the SOURCE button for an input or press the
SELECT button for a track to adjust its EQ and other
settings.
Using the input equalizer
INPUTS A to H and tracks 1 to 31/32 have independent
3-band EQs (equalizers).
CAUTION
The effect of the input equalizer will be recorded. If you
plan to make EQ adjustments during mixdown, turn
input equalizers OFF and turn track equalizers ON.
Adjust the equalizer settings on the Mixer screen.
1. Press the MIXER button to open the Mixer screen.
2. Press the SOURCE button of an INPUT (A to H) or
the SELECT button of a track to open the Mixer
screen with the corresponding equalizer.
3. Press the EQUALIZER ON/OFF button to the right of
the LOW FREQ knob to turn the equalizer on/off.
The equalizer parameters are as follows.
GAIN FREQ
HIGH
Setting range: ±12
dB
(Default: 0 dB)
Setting range: 1.7 kHz to
18 kHz
(Default: 10 kHz)
MID
Setting range: ±12
dB
(Default: 0 dB)
Setting range: 32 Hz to
18 kHz
(Default: 1.0 kHz)
LOW
Setting range: ±12
dB
(Default: 0 dB)
Setting range: 32 Hz to
1.6 kHz
(Default: 100 Hz)
Use track SELECT buttons to select desired tracks.
Use INPUT SOURCE buttons to select desired inputs.
Use HIGH, MID and LOW GAIN knobs to adjust the
gain of each band.
Use the HIGH, MID and LOW FREQ knobs to adjust the
center frequency of each band.
Use the MID Q knob to set the resonance (width) of the
MID FREQ band.
Setting range:
0.25
to
16
(Default:
0.5
)
NOTE
•
The "Q" value is the center frequency of the equalizer
divided by the bandwidth. A high Q value reduces the
range of the cut or boost applied to the frequencies.
Depending on the equalizer setting, the graph at the top
of the screen changes.
•
If you press the F1 (
EQ FLAT
) button, all the settings
shown on the open Mixer screen will be restored to their
default values.
3. After making the settings, press the HOME button
to return to the Home screen.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info