617894

Tascam DP-32 Manual

41
Zoom out
Zoom in
Previous page
1/104
Next page
TASCAM DP-32 41
Assigning inputs to stereo tracks
Stereo tracks are always recorded simultaneously.
You cannot record to a single track of a stereo track pair.
1. When the recorder is stopped, press the ASSIGN
button to open the Assign screen.
2. Use the SELECT button of each track or the
CURSOR (5/b/g/t) buttons to move the cursor
to the stereo track to which you want to assign a
recording source.
3. Press the SOURCE button of the desired input (A to
H) or turn the JOG/DATA dial to set the input source
of each stereo track.
Options:
A/A
,
A/B
,
B/B
,
C/C
,
C/D
,
D/D
,
E/E
,
E/F
,
F/F
,
G/G
,
G/H
, and
H/H
4. After making the settings, press the ASSIGN button
or the HOME button to return to the Home screen.
NOTE
•
You can assign a single input source to multiple tracks by
keeping the SOURCE button of the desired input (A to
H) pressed and pressing the SELECT buttons of multiple
tracks.
•
However, you cannot assign multiple input sources to the
same track.
Assigning inputs to a stereo bus
To use an external effect device, assign the inputs (A to H)
that are connected to the outputs of the effect (EFFECT
RETURN) to a stereo bus to return the effect signal to that
stereo bus. You can also assign inputs to stereo buses
during mixdown, allowing you to mix up to 8 input signals
with the playback tracks.
1. When the recorder is stopped, press the ASSIGN
button to open the Assign screen.
2. Use the STEREO SELECT button or the CURSOR
(5/b/g/t) buttons to move the cursor to the
STEREO BUS
display area.
3. Use the CURSOR (g/t) buttons to move the cursor
to the stereo bus to which you want to assign the
input source.
4. Press the SOURCE button of the desired input
(INPUT A to H) or turn the JOG/DATA dial to set the
input source to the stereo bus.
5. After making the settings, press the ASSIGN button
or the HOME button to return to the Home screen.
Checking assignments
You can check the current assignment on the Assign
screen.
The assigned input source name (
A
to
H
) is shown on the
level meter display area of each track on the Home screen.
6 - Basic Recording
NOTE
When the power is turned off, the current song is saved and
all song-related settings are stored (except when the song
protection function is enabled).
The next time you turn the power on, all stored settings will
be restored.
Canceling assignments
When the Assign screen is open, pressing the F1
(
DEFAULT
) button restores the default track type and
assignment settings. On this screen, pressing the F2
(
ALL CLEAR
) button clears all assignment settings.
Using phantom power
When connecting a condenser microphone that requires
phantom power, press the PHANTOM (+48V) for INPUTS
A to D or INPUTS E to H when the recorder is stopped to
turn phantom power on or off.
When you turn phantom power on, the PHANTOM (+48V)
button lights and phantom power is supplied to the XLR
jacks of INPUTS A to D and/or INPUTS E to H.
When the GUITAR indicator is lit, however, INPUT H will
not receive phantom power even if phantom (+48V)
power is on (indicator lit) for E-H.
CAUTION
•
Turn the STEREO fader down before turning phantom
power on or off. Depending on the microphone,
a loud noise could occur, resulting in harm to the
equipment and hearing.
•
Do not connect or disconnect a microphone when
phantom power is on. This could cause a loud noise
that might damage the equipment.
•
Turn phantom power on only when using a
condenser microphone that requires phantom power.
•
Do not supply phantom power to an unbalanced
dynamic microphone. Doing so could cause a
malfunction.
•
Supplying phantom power to some types of ribbon
microphones could cause a malfunction. Do not
supply phantom power to a ribbon microphone if
you are in doubt.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-32 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info