534639
89
Zoom out
Zoom in
Previous page
1/108
Next page
TASCAM DP-24 89
14 - Using CDs
1. When Recorder mode is
Multi Track
mode,
press the CD button to open the
CD
menu screen.
2. Place a blank CD (unused CD-R/CD-RW disc or a
completely erased CD-RW) on the disc tray.
NOTE
If you put a CD-R/CD-RW that has been used previously
to write tracks using Track At Once and has not been
finalized, you can add another track to it. In this case,
the pop-up window for erasing a CD-RW disc does not
appear.
3. Use the JOG/DATA dial to select (blue highlight)
MASTER WRITE
and then press the F4 (t) button.
This opens the
MASTER WRITE
screen and shows
a list of songs that have been recorded in master files.
Master files that are not recorded at
44.1kHz
or
16bit
are not displayed.
4. Use the JOG/DATA dial to select (blue highlight)
only one song to write to the CD-R/CD-RW, and
then press the F2 (4) button.
A check mark 4 appears in the check box next to the
selected song.
NOTE
To remove the check mark 4 from a check box, press
the F2 (4) button again while the song is selected (blue
highlight).
5. Press the F4 (t) button.
A pop-up window asking whether you want to
perform the finalize process appears when the writing
is completed.
TIP
Finalize the disc if you do not plan to add any more tracks
to the CD-R/CD-RW. (See "Finalizing a CD" on page 90.)
6. To finalize, use the JOG/DATA dial to select
ON
,
otherwise, select
OFF
, and then press the F4 (t)
button again. (Default:
OFF
)
The confirmation message shown below appears.
7. Press the F2 (
YES
) button to begin writing to the
CD-R/CD-RW.
Using LIVE WRITER
1. When Recorder mode is
Multi Track
mode,
press the CD button to open the
CD
menu screen.
2. Place a blank CD (unused CD-R/CD-RW disc or a
completely erased CD-RW) on the disc tray.
3. Use the JOG/DATA dial to select (blue highlight)
LIVE WRITER
and then press the F4 (t) button.
This opens the
LIVE WRITER
screen where you
can divide a master file by setting position marks to
it. Master files that are not recorded at
44.1kHz
,
16bit
, are not displayed.
At this time, if there is no master file created or if no
mark has been set, the messages appear.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-24 in the language / languages: English as an attachment in your email.

The manual is 11,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info