534639

Tascam DP-24 Manual

87
Zoom out
Zoom in
Previous page
1/108
Next page
TASCAM DP-24 87
14 - Using CDs
NOTE
During playback, selecting a track does not affect
playback. Stop playback and start again to play the
selected track.
Creating an Audio CD
Using this unit, you can create Audio CDs that can be
played back by ordinary CD players by writing the master
files created for songs to CD-R and CD-RW discs. (See
"Creating a master file" on page 69.)
Use the following three methods to create an Audio CD.
Disc At Once (DAO)
ª
Use this method to write multiple master files at one time.
Since this method automatically finalizes the disc, making
it playable by an ordinary CD player, you will be able to
use the completed disc with other CD players right away.
(See "Finalizing a CD" on page 90.)
However, once DAO is completed, you will not be able
to add any more tracks to the CD-R/CD-RW that was
automatically finalized.
Track At Once (TAO)
ª
Use this method to write a single master file at a time to a
CD-R/CD-RW.
Use the Track At Once when you want to write files to the
CD-R/CD-RW at different times.
With Track At Once, the CD-R/CD-RW is not automatically
finalized.
Note, however, that an non-finalized CD-R/CD-RW can be
played in this unit, but cannot be played in an ordinary CD
player.
After you have written all the master files to a disc using
Track At Once, finalize the disc. (See "Finalizing a CD" on
page 90.)
You cannot add more tracks to a CD-R/CD-RW that has
been finalized.
LIVE WRITER function
ª
You can use marks to divide a master file into multiple
parts, and write them as multiple tracks to a disc.
Using Disc At Once
Use Disc At Once when you have selected multiple tracks.
Using Disc At Once, you can set the order of multiple
tracks as you like. Moreover, you can set the time and add
silent gaps between songs.
NOTE
When using Disc At Once, you can also make multiple
discs with the same contents. When doing so, use
identical discs (same manufacturer, type and capacity).
1. When Recorder mode is
Multi Track
mode,
press the CD button to open the
CD
menu screen.
2. Place a blank CD (unused CD-R/CD-RW disc or a
completely erased CD-RW) on the disc tray.
3. Use the JOG/DATA dial to select (blue highlight)
MASTER WRITE
and then press the F4 (t)
button.
This opens the
MASTER WRITE
screen and shows
a list of songs that have been recorded in master files.
Master files that are not recorded at
44.1kHz
or
16bit
are not displayed.
4. Use the JOG/DATA dial to select (blue highlight)
songs which you want to write to CD-R/CD-RW, and
press the F2 (4) button to select the desired songs
(selected songs check boxes are marked with 4).
NOTE
To remove the check mark 4 from a check box, press
the F2 (4) button again while the song is selected (blue
highlight).
5. Repeat step 4 above as necessary.
6. After you finish selecting songs, press the F4 (t)
button.
The
WRITE SONG LIST
screen appears. On this
screen, you can change the order that the master files
will be written to the CD-R/CD-RW and set the gaps
between them.
… 87 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-24 in the language / languages: English as an attachment in your email.

The manual is 11,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info