534639
24
Zoom out
Zoom in
Previous page
1/108
Next page
24 TASCAM DP-24
3 – Names and Functions of Parts
1 GUITAR indicator
This indicator lights when the LINE-GUITAR switch on
the rear panel is set to GUITAR.
2 Display
Use the JOG/DATA dial or the CURSOR (5/b/g/
t) buttons to return to the Home screen, to open
the
MENU
screen, to assign input signals to tracks,
to change parameters for each input or track, and to
perform many other operations.
3 PHANTOM (+48V) button/indicator
Use this button to turn the phantom power on/off for
the MIC/LINE INPUT A-D and E-H jacks on the rear
panel.
The PHANTOM indicator lights when phantom power
is turned on.
When the GUITAR indicator is lit, even if phantom
(+48V) power is ON (indicator lit) for E-H, INPUT H will
not receive phantom power.
CAUTION
Use the STEREO fader to lower the output volume
of the unit before turning phantom power on or off.
Depending on the microphone, a loud noise could
occur, damaging equipment and harming people's
hearing.
Do not connect or disconnect a microphone when
phantom power is turned on.
Turn phantom power on only when using a condenser
microphone that requires phantom power.
Do not supply phantom power to an unbalanced
dynamic microphone.
Supplying phantom power to some types of ribbon
microphones could break them. Do not supply
phantom power to a ribbon microphone if you are in
doubt.
4 OL indicators (A-H)
These indicators light when the input source signal is
too loud.
5 TRIM knobs (A-H)
Use these knobs to adjust the input levels. (See
"Making the first recording" on page 49.)
6 SOURCE buttons/indicators
When you press one of these buttons, the
corresponding input (INPUT A to H) is selected (its
button lights) as the input source.
The mixer and other functions are applied to the
selected input.
These buttons are also used to assign an input source
to a track (see "Assigning inputs" on page 44).
7 MUTE/SOLO indicators
These indicators light when a track is muted or in Solo
mode. When the SOLO button is not lit, it indicates the
Top panel
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-24 in the language / languages: English as an attachment in your email.

The manual is 11,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info