534639
25
Zoom out
Zoom in
Previous page
1/108
Next page
TASCAM DP-24 25
track is in Mute mode. When the SOLO button is lit, it
indicates the track is in Solo mode.
8 REC buttons/indicators
Use these buttons to turn recording on/off for each
track.
To monitor a track's input sound through headphones
or a monitoring system, press the REC button for the
corresponding track.
When the REC button is turned on, the REC button
flashes when the recorder is stopped, and lights during
recording.
9 SELECT buttons/indicators
When you press one of these buttons, the
corresponding track (1 to 23/24) is selected (its button
lights) as the current channel.
The mixer and other functions are applied to the
current channel.
These buttons are also used for the following
purposes.
To assign an input source to a track (See "Assigning
inputs" on page 44.)
To assign effects to an input (See "Inserting a guitar
effect" on page 64.)
To select the group for FADER GROUP
0 TRACK faders (TRACK 1 to TRACK 23/24)
Use these faders to adjust the monitoring level of a
track's playback signal or the input signal assigned to
the track. (See "Levels and balance" on page 68.)
q Operation buttons for various functions
Use these buttons to activate/deactivate functions or
to perform the operation set to them.
w FADER GROUP button/indicator
Press this button to set a fader group.
The button becomes lit.
e STEREO SELECT button/indicator
When the Assign screen is displayed, you can press this
button to move the cursor from the
TRACK
display to
the
STEREO BUS
display, and set the input for the
stereo bus.
r STEREO fader
Use this fader to adjust the stereo signal level output
from the STEREO OUT jacks and PHONES jack. Use
this fader also to adjust the recording level when
bouncing or mixing down tracks.
t REW (m) (TO ZERO) button
When stopped or during playback, press and hold this
button to rewind. Rewind is performed at a fixed 10x
speed.
Press briefly to jump to the previous mark.
Press and hold the STOP (8 ) button and press
this button to locate the beginning of the song
(
00:00:00:00
= ZERO point). (See "Returning
to zero (TO ZERO) and returning to last recording
position (TO LAST REC)" on page 55.)
y F FWD (,) (TO LAST REC) button
When stopped or during playback, press and hold this
button to fast-forward. Fast-forward is performed at a
fixed 10x speed.
Press briefly to jump to the next mark.
Press and hold the STOP (8 ) button and press this
button to locate the last recording position (LAST
REC point). (See "Returning to zero (TO ZERO) and
returning to last recording position (TO LAST REC)" on
page 55.)
u STOP (8) button
Use this button to stop playback, recording and fast-
forward/rewind. Press at the same time as you press
the REW (m) (TO ZERO) button or F FWD (,) (TO
LAST REC) button to locate the beginning of the song
(
00:00:00:00
= ZERO point) or the last recording
position (LAST REC point). (See "Returning to zero (TO
ZERO) and returning to last recording position (TO
LAST REC)" on page 55.)
i PLAY (7) button/indicator
Press this button to start playback.
During recording, press this button to stop recording
and start playback (punch out).
During playback or recording, the PLAY (7) button
becomes lit.
o RECORD (0) button/indicator
Press this button to start recording.
This button becomes lit during recording. During
playback, if you press this button when a track REC
button is flashing, recording to that track will begin
(punch in). (See "Auto punch in/out" on page 57.)
3 – Names and Functions of Parts
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-24 in the language / languages: English as an attachment in your email.

The manual is 11,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info