617896

Tascam DP-03SD Manual

50
Zoom out
Zoom in
Previous page
1/76
Next page
50 TASCAM DP-03SD
9 – Mixing down and mastering tracks
A stereo master track recorded by this unit is saved as part of the
song.
This stereo master track can be recorded by an external stereo
recorder, and can also be converted by the unit into a WAV file
and exported to a computer. (See “Exporting a stereo master
track” on page 65.)
NOTE
Only one stereo master track can be saved in each song.
Setting the starting and ending points
Before creating a stereo master track, set the stereo master track
start and end points. The time between the song’s IN point and
the OUT point will be recorded as the stereo master track.
Ordinarily, set the beginning of the song as the IN point and the
end of the song as the OUT point.
Press and hold the IN [SET IN] button where you want to set the
start (IN) point of the stereo master track, and press and hold the
OUT [SET OUT] button where you want to set the end (OUT)
point.
For details about how to change the IN and OUT points, see
“Using IN, OUT and TO points” on page 41.
Recording a stereo master track
After setting the IN and OUT points, you are ready to record the
stereo master track.
1 In MULTITRACK mode, press the MIXDOWN/MASTERING
button.
After the
Mixdown !
pop-up message appears the
unit switches to
MIXDOWN
mode and the Home Screen
reopens.
In this state, if you play back or record, you can hear the
signal of the mixed tracks (the signal being recorded)
through headphones or a monitoring system.
NOTE
•
When in MIXDOWN mode,
MIXDOWN
appears in the bar at
the upper left of the display.
•
If you try to enter
MIXDOWN
mode when the length of the
interval between IN and OUT points is less than 4 seconds,
a
Trk Too Short
pop-up message appears and you
cannot enter
MIXDOWN
mode.
•
In
MIXDOWN
mode, you cannot change the IN, OUT or TO
points.
•
Some playback functions and other functions do not work
when the unit is in mixdown mode. If you try to use one of
these functions, an “In Mixdown Mode” pop-up message
appears.
2 Press and hold the RECORD (–) button and press the PLAY
(Á) button to start the mixdown. The RECORD (–) button
indicator lights.
Regardless of the recorder’s current playback position, the
mixdown starts from the IN point.
Use the TRACK faders and PAN knobs as necessary to mix the
tracks to stereo. These adjustments will be reflected in the
stereo master track.
When the recorder reaches the OUT point, recording
automatically stops.
3 If you want to redo the creation of the stereo master track,
press and hold the RECORD (–) button and press the
PLAY (Á) button to begin. A new stereo master track will
be created, and the previous stereo master track will be
overwritten.
NOTE
After recording the stereo master track, you can play back
the stereo master track to check it. (See “Checking the stereo
master track” on page 51.)
TIP
You can also undo the creation of a stereo master track. In
other words, after recording the stereo master track multiple
times, you can undo and use a stereo master track that you
recorded earlier.
Exiting MIXDOWN mode
Press the MIXDOWN/MASTERING button twice to return to
MULTITRACK mode.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info