617896

Tascam DP-03SD Manual

34
Zoom out
Zoom in
Previous page
1/76
Next page
34 TASCAM DP-03SD
6 – Basic Recording
OL indicators and level meters
The audio levels of this unit can be checked using the INPUT A
and INPUT B OL indicators and the level meters shown on the
display.
The level meters allow the signal levels to be monitored, and
they can also be used to confirm whether signals are being
input into the unit. For example, if the A and B level meters are
moving a signal is being input into the unit even if you cannot
hear anything when monitoring.
As shown below, if a “
–
” appears at the top of a level meter, the
level is too high (when a “
–
” appears, it will stay on screen for a
while before automatically disappearing). If the level is too loud,
the sound might be distorted, so lower the level until the “
–
”
stops appearing.
If an OL indicator lights, the signal from the input source could
be too loud or the TRIM knob set too high.
If the OL indicator lights even though the TRIM knob is set to
the minimum position, the input source signal is too strong.
Lower the volume on the input source.
Overload indication
Input level meters (A, B)
The and level meters on the left side of the display show
the input levels of INPUT A and INPUT B.
Use the INPUT A and INPUT B TRIM knobs and the output
volumes of the input sources to adjust the level.
Track level meters (1–8)
These level meters show either the playback signal levels or the
input signal levels of the corresponding tracks.
The signal levels shown by the track level meters depend on the
operating conditions as shown below.
REC indicator Transport status
Level meter
display contents
Unlit Playback
Track playback
signal
Blinks (record
standby)
Playback
Track playback
signal
Blinks (record
standby)
Stopped Track input signal
Lit (during
recording)
Recording Track input signal
NOTE
When the playback signal is being shown, the level of the
recorded signal of the track is shown, so the levels shown by
the meters cannot be changed.
When the input signal is being shown, the levels shown by
the meters can be changed using the TRIM knobs for INPUT
A and INPUT B.
Stereo level meter (L, R)
These show the stereo bus output level of this unit. Adjust the
output level with the MASTER fader.
Assigning inputs
When using this unit, “assigning inputs” means setting the
recording source for each track to either INPUT A or INPUT B.
This unit can simultaneously record a maximum of two tracks.
You can also record one input to two tracks simultaneously (in
this case, you cannot use the other input). You cannot assign two
inputs to the same track.
1 When the recorder is stopped, press the ASSIGN button to
open the
INPUT ASSIGN
screen.
By default,
A
(INPUT A) is assigned as the recording source
for tracks
1
,
3
,
5
and
7
, and
B
(INPUT B) is assigned as the
recording source for tracks
2
,
4
,
6
and
8
.
2 Use the REC button to set the input source for each track to
either
A
(INPUT A) or
B
(INPUT B).
Each time you press the REC button the setting switches
between
A
and
B.
3 After making the settings, press the HOME button to return
to the Home Screen.
Using input EQ (equalizer)
INPUT A and INPUT B each have a two-band equalizer (EQ).
Use the
INPUT EQ
screen to make input EQ settings.
1 Press the EQ button to open the
EQ SETTING
screen.
This shows the setting screen for track one (
TR1
).
2 Press the F1 (
INPUT
) button to open the
INPUT EQ
screen. This shows the setting screen for
IN A
.
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DP-03SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DP-03SD in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info