617901
52
Zoom out
Zoom in
Previous page
1/64
Next page
52
TASCAM DA-6400/DA-6400dp
11 – Other Settings, Information Screens and Keyboard Operations
Firmware update procedures
1. Download the latest firmware from the TEAC Global Site
(http://teac-global.com/). If the downloaded file is in ZIP
format or another compressed file type, decompress it.
2. Copy the downloaded firmware to the root directory (top
level) of a USB flash drive.
3. Insert the USB flash drive prepared in step 2 into the USB2.0
port on the front of the unit.
4. Select the
F/W UPDATE
item on the
SYSTEM SETUP
page to open the
Firmware update
screen. (See
“Menu operation procedures” on page 16.)
5. Select the device to be updated.
Options
Main
: Update the firmware of the main unit
Slot1
: Update the firmware of the I/O card installed in
SLOT 1
Slot2
: Update the firmware of the I/O card installed in
SLOT 2
6. When the USB flash drive and firmware update file have
been verified, the following screen will appear.
NOTE
The screen above shows a list of firmware update files in the
root folder of the USB flash drive connected to the USB2.0
port on the front of the unit. The firmware copied in step 2
above should also be shown.
No Update File
is shown if no update file is in the
directory.
A maximum of five lines of firmware can be shown at the
same time. If there are more files than this, use the MULTI
JOG dial to scroll the list.
The screen shown above is an example. The actual
appearance will differ.
7. Select the firmware update to use.
The screen shown below will appear.
The number of the current version is shown on the left and
the update version is shown on the right.
NOTE
The screen shown above is an example. The actual
appearance will differ.
8. Press the MULTI JOG dial to start the update.
CAUTION
Be careful not to let the power be interrupted during the
update.
If the power is interrupted during the update, the unit might
become unstartable.
9. When the update completes, the following screen will
appear.
10. Press the STANDBY/ON switch on the unit to turn it off.
11. Refer to “Checking the firmware version on page 51 and
confirm that the latest firmware is being used.
This completes the update procedure.
12. Delete the firmware update file from the USB flash drive.
Viewing media information
You can view information about the current device's media.
1. Select the
MEDIA INFO
item on the
MEDIA
page to
open the
MEDIA INFO
screen.
2. Select the media that you want to check, and open the
media information pop-up.
You can view information about the current device's media,
and check its used space, open space and total size.
3. Press the EXIT [PEAK CLEAR] button to return to the Menu
Screen.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info