617901

Tascam DA-6400 Manual

51
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM DA-6400/DA-6400dp
51
11 – Other Settings, Information Screens and Keyboard Operations
INFO button and indicator appearance
The INFO indicator lights blue when the unit is functioning
properly.
The INFO indicator lights red when an error or warning has
occurred with the unit.
Press this button when the INFO indicator is lit blue to show the
unit's operation status on the display. Press this button when
the INFO indicator is lit red to show the error message on the
display.
8
Operation status display (when lit blue)
Contents
CLOCK
Sampling frequency.and clock source currently used
for operation
FILE
Information about currently selected file
File type/quantization bit depth
Number of channels/file mode
Recording date
When lit blue, press the INFO button to switch between the
Home Screen and operation status display.
8
Alert display (when lit red)
Contents 1
Rebuilding is necessary. Press the MULTI JOG dial to
rebuild.
Contents 2
The remaining recording time is less than 10 minutes.
This appears when the remaining recording time
becomes less than 10 minutes when recording or in
recording standby.
Once this alert has been viewed, it will not appear again
until recording ends.
Contents 3
Due to the increased number of files in a folder, for
example, writing to the media has become slower so
the recording buffer is about to overflow. Reduce the
number of recording channels or create a new folder.
These messages could be shown at the same time.
8
Error display 1 (when lit red)
Contents
This shows media errors.
For the DA-6400dp, this also shows power supply errors.
(See “Setting the power redundancy check function
(DA-6400dp only)” on page 55.)
8
Error display 2 (when lit red)
Contents
This shows master clock and slot errors.
Press the INFO button to cycle through the screens in this order:
alert, error 1, error 2, operation status, Home Screen.
Alert and error screens, however, will only be shown when one
has occurred (when lit red).
Checking the firmware version
1. Select the
VERSION INFO
item on the
SYSTEM
SETUP
page to open the
VERSION INFORMATION
screen. (See “Menu operation procedures” on page 16.)
On the
VERSION INFORMATION
screen, information
is shown about the system firmware version and build
number, as well as cards installed in SLOT 1 and SLOT 2.
2. Press the EXIT [PEAK CLEAR] button to return to the Menu
Screen.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info