617901
44
Zoom out
Zoom in
Previous page
1/64
Next page
44
TASCAM DA-6400/DA-6400dp
7 – Internal Settings
VNC (virtual network computing)
By using a VNC viewer application, you can view and operate the
screen shown on this unit's display from a computer.
The following operations are possible using a mouse with a VNC
viewer application.
Mouse left click: Same function as pressing the unit's MULTI
JOG dial
Mouse right click: Same function as pressing the unit's EXIT
[PEAK CLEAR] button
Mouse wheel operation: Same function as turning the unit's
MULTI JOG dial
Mouse wheel press and turn: Same function as turning
the unit's MULTI JOG dial while pressing and holding the
SHIFT button to make rough setting changes (MOVE Fast
operation).
In addition, when the VNC viewer application is active, the
computer keyboard can be used for the same operations as
though it were connected directly to the unit. See “List of
keyboard operations on page 54 for details.
8
Required settings for VNC connection
The following settings are necessary to connect to this unit by a
VNC viewer application.
IP address: The IP address of the unit is shown in the
IP
ADDRESS
item on the
NETWORK
page.
Password: DA-6400 (default) (Case-sensitive) This can be
changed on the
PASSWORD
screen. (See “Network function
settings” on page 39.)
NOTE
Only one VNC connection is possible at a time.
When the KEYBOARD item is set to
LOCK
on the
LOCK
SETUP
screen, a VNC viewer application can be used to
view the unit's display but it cannot be used to control the
unit.
If a
NETWORK
page setting is changed when there is a VNC
connection, the connection will be interrupted.
For information about VNC viewer applications that have
already been confirmed to work with this unit, please
contact TASCAM customer support (contact information at
the end of this manual).
When files are being transferred by FTP or the system uses
88.2/96kHz sampling frequency, the appearance and
operation of the VNC viewer application will not be smooth.
Making oscillator settings
A 1kHz sine wave is output at the reference level (See “Setting
the reference level” on page 23.).
Use this to check connections, for example.
1. Select the
OSCILLATOR
item on the
SYSTEM SETUP
page to open the
OSCILLATOR
screen. (See “Menu
operation procedures” on page 16.)
2. Turn the oscillator on or off.
Options:
OFF
(default value),
ON
3. Confirm the setting and return to the Menu Screen.
NOTE
If you change the reference level on the
REFERENCE
LEVEL
screen, the oscillator output level will also change.
The reference level cannot be changed on this screen.
The frequency is fixed at 1kHz.
The oscillator ON setting is not backed up.
The oscillator cannot be turned ON during playback.
The oscillator will automatically be turned OFF at the
following times.
i During startup
i When loading a folder
i When playback starts
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info