617901
43
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM DA-6400/DA-6400dp
43
7 – Internal Settings
o When rebuilding becomes necessary, the INFO
indicator will light red and the following pop-up
message will appear.
Press the MULTI JOG dial to rebuild.
Press the EXIT [PEAK CLEAR] button to close the
pop-up message.
o When rebuilding becomes necessary and the INFO
indicator lights red, press the INFO button to open
an ALERT INFORMATION pop-up message like the
following.
When this appears, press the MULTI JOG dial to open a
rebuild confirmation pop-up message. Press the MULTI
JOG dial again to rebuild.
Press the EXIT [PEAK CLEAR] button to close the
pop-up message.
o When rebuilding becomes necessary, an V icon
will appear in the following locations. Select the
REBUILD
item in the
BROWSE
screen pull-up menu
to rebuild.
o At the right side of the
BROWSE
item on the
GENERAL
menu page.
o At the top right of the
BROWSE
screen.
REBUILD
REQUIRED
appears to the right of the icon.
o To the right of the
REBUILD
item in the
BROWSE
screen pull-up menu.
5. Adding new folders to the unit
Adding new folders to the unit is always possible.
6. Deleting folders on the unit
The current folder can only be deleted when the unit is
stopped.
Folders other than the current folder can be deleted at any
time.
7. Change the names of files and folders on the unit
The names of files and folders on the unit cannot be
changed.
NOTE
FTP transfer with USB flash drives is only possible when the
unit is stopped. Do not edit, load folders, skip or conduct
other operations.
Remote control (Telnet)
Remote control of this unit by Ethernet using Telnet through
port 23 is possible.
Required settings for Telnet connection
The following settings are necessary to connect to this unit
by Telnet.
IP address: The IP address of the unit is shown in the IP
ADDRESS item on the
NETWORK
page.
Port number: 23
Password: DA-6400 (default) (Case-sensitive)
This can be changed on the
PASSWORD
screen. (See “Network function settings” on
page 39.)
Connecting to this unit by Telnet
1. After connecting to this unit by Telnet with the above IP
address and port number, press the computer Enter key.
2. “Enter Password” will appear on the Telnet console. Enter the
above password and press the Enter key.
3. When login succeeds, “Login Successful” will appear on the
Telnet console. Enter exit and press the Enter key to end the
Telnet connection.
NOTE
Two Telnet connections are possible at the same time.
Telnet connection is not possible when the EXTERNAL
Control item is set to
LOCK
on the
LOCK SETUP
screen.
If the setting is changed to
LOCK
when there is a Telnet
connection, the connection will be interrupted.
If a
NETWORK
page setting is changed when there is a
Telnet connection, the connection will be interrupted.
For information about this unit's Telnet command protocol,
please contact TASCAM customer support (contact infor-
mation at the end of this manual).
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info