617901
38
Zoom out
Zoom in
Previous page
1/64
Next page
38
TASCAM DA-6400/DA-6400dp
7 – Internal Settings
PARALLEL connector settings
Use the
PARALLEL INPUT
and
PARALLEL OUTPUT
pages to make parallel connector input and output settings.
PARALLEL INPUT page settings
8
INPUT AUX1 – INPUT AUX6
This shows the current functions set for INPUT AUX1 – INPUT
AUX6 of the PARALLEL connector.
Select
INPUT AUX1
INPUT AUX6
, and press the MULTI
JOG dial to open the
PARALLEL INPUT
screen.
When
INPUT AUX1
selected
INPUT AUX1
INPUT AUX6
items
Set the functions for INPUT AUX1 – AUX6 of the
PARALLEL connector.
Options:
PLAY/PAUSE
PAUSE
(default for INPUT AUX6)
REC
FADER REC
(default for INPUT AUX3)
FADER START
REW
(default for INPUT AUX4)
F.FWD
(default for INPUT AUX5)
TAKE SKIP -
(default for INPUT AUX2)
TAKE SKIP +
(default for INPUT AUX1)
MARK SKIP -
MARK SKIP +
TAKE/MARK SKIP -
TAKE/MARK SKIP +
MARK
NOTE
Setting multiple FADER REC and FADER START settings to
INPUT AUX is not possible.
When set to FADER REC, low signal input starts recording
and high signal input stops recording.
When set to FADER START, low signal input starts playback
and high signal input pauses playback.
When set to anything other than the above, it operates with
low signal input of 50 msec or longer. (See “Note about the
PARALLEL connector” on page 12.)
PARALLEL OUTPUT page settings
8
OUTPUT AUX1 – OUTPUT AUX5
This shows the current functions set for OUTPUT AUX1 –
OUTPUT AUX5 of the PARALLEL connector.
Select
OUTPUT AUX1
OUTPUT AUX5
, and press the
MULTI JOG dial to open the
PARALLEL OUTPUT
screen.
When
OUTPUT AUX1
selected
OUTPUT AUX1
OUTPUT AUX5
items
Set the functions for OUTPUT AUX1 – AUX5 of the
PARALLEL connector.
Options:
STOP TALLY
(default for OUTPUT AUX1)
PLAY TALLY
(default for OUTPUT AUX4)
PAUSE TALLY
(default for OUTPUT AUX5)
REC TALLY
(default for OUTPUT AUX2)
EOM TALLY
ERROR TALLY
(default for OUTPUT AUX3)
EOM/ERROR TLLY
NOTE
When the INFO indicator is lit red, an ERROR TALLY signal is
being output.
8
EOM
This shows the setting status of the EOM (End Of Message)
function.
If the available recording time (when recording or in recording
standby) or the total remaining playback time (when playing
back or in playback standby) becomes less than the set time,
an EOM tally signal will be output from the pin number of the
PARALLEL connector that corresponds to any
OUTPUT AUX1
OUTPUT AUX5
item set to
EOM TALLY
or
EOM/ERROR
TLLY
.
Select the
EOM
item, and press the MULTI JOG dial to open the
EOM
screen.
TIME
item
Set the amount of time that will cause an EOM tally
signal to be output.
Options:
OFF
(default),
1sec
99sec
(1sec incre-
ments)
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info