617901

Tascam DA-6400 Manual

36
Zoom out
Zoom in
Previous page
1/64
Next page
36
TASCAM DA-6400/DA-6400dp
7 – Internal Settings
Setting the timecode
Use the
TC SETUP 1
and
TC SETUP 2
pages to make
settings related to timecode.
TC SETUP 1 page settings
8
GENERATOR TC
This shows the current timecode generator time.
Select the
GENERATOR TC
item, and press the MULTI JOG
dial to open the
GENERATOR TC
screen.
GENERATOR TC
screen when set to
FREE RUN
GENERATOR TC
screen when not set to
FREE RUN
GENERATOR TC
item
When the
GENERATOR MODE
item on the
TC
GENERATOR MODE
screen is set to
FREE RUN
,
select RESTART and press the MULTI JOG dial to reset
the timecode generator timecode to the start time.
TC INPUT
item
When the
GENERATOR MODE
item on the
TC
GENERATOR MODE
screen is set to
FREE RUN
,
select CAPTURE and press the MULTI JOG dial to capture
the current timecode time shown for
TC INPUT
and
set it as the timecode generator timecode.
When the
GENERATOR MODE
item on the
TC
GENERATOR MODE
screen is set to
FREE ONCE
or
JAM SYNC
, the “waiting” (capture status) indicator
lights green when waiting to capture timecode. When
timecode is captured, the indicator turns off.
START TIME
item
This shows the time when timecode resumes, which
is set with the
START TIME
item on the
START
TIME
screen.
8
GENERATOR U.B.
This shows the user bits (U.B.) for the timecode generator.
Select the
GENERATOR U.B.
item, and press the MULTI
JOG dial to open the
GENERATOR USER BITS
screen.
GENERATOR U.B.
item
Set the user bits (U.B.).
NOTE
You can also use a USB keyboard to input numbers and the
letters A–F.
8
TC INPUT MONITOR
This shows the input timecode time.
8
TC INPUT FRAME
This shows the input timecode frame type.
8
TC INPUT U.B.
This shows the user bits (U.B.) for the input timecode.
8
START TIME
When the RESTART item on the
GENERATOR TC
screen is
selected and the MULTI JOG dial is pressed, the time that the
timecode restarts is shown in the
GENERATOR TC
item on
the
TC SETUP 1
page.
Select the
START TIME
item, and press the MULTI JOG dial
to open the
START TIME
screen.
START TIME
item
Set the time when timecode resumes.
NOTE
You can also use a USB keyboard to input numbers.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info