617901
17
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM DA-6400/DA-6400dp
17
3 – Preparation
Installing an SSD/HDD drive in the
case
1. While pressing the cover lock on the left side of the
SSD/HDD case handle, slide the lower cover toward the
connector and remove it.
2. While pressing the cover lock on the right side of the
SSD/HDD case handle, slide the upper cover toward the
connector and remove it.
3. Place the SSD/HDD drive in the top of the case, and attach it
to the connector at the handle end.
4. Attach the set SSD/HDD drive with screws through the
bottom of the case.
5. While pressing the cover lock part of the SSD/HDD case,
slide the lower and upper covers from the connector end to
attach them.
CAUTION
Be careful not to squeeze parts near the handle when
attaching the upper and lower covers.
Loading and removing SSD/HDD cases
Loading an SSD/HDD case
Insert the SSD/HDD case into the SSD/HDD SLOT on the front of
the unit until they are even.
CAUTION
Before inserting the SSD/HDD case into the main unit,
remove the static electricity protection cover from the SSD/
HDD case main unit connector.
Static electricity
protection cover
NOTE
If you are unable to insert the SSD/HDD case properly, try
removing it once and reinserting it.
You can insert a case even when the unit is on.
Removing an SSD/HDD case
SSD/HDD cases can be ejected.
CAUTION
Do not remove the SSD/HDD case from the unit when the
SSD/HDD is being accessed (during recording, playback,
when data is being written or at other times when the
SSD/HDD case indicator is blinking orange). Removing a
case when its drive is being accessed could cause proper
recording to fail, recorded data to be lost, and sudden loud
noises from monitoring equipment, which might damage
the equipment or harm hearing.
NOTE
You can remove the SSD/HDD case from the unit even when
the unit is on as long as the SSD/HDD is not being accessed
(during recording, playback, when data is being written or
at other times when the SSD/HDD case indicator is blinking
orange).
1. Slide the RELEASE switch toward >.
This unlocks the loaded SSD/HDD case so that it can be
removed.
2. While sliding the RELEASE switch toward >, grasp the
SDD/HDD case by hand and pull it out.
CAUTION
After removing the SSD/HDD case from the main unit,
attach the static electricity protection cover to the SSD/HDD
case main unit connector.
Static electricity
protection cover
Using the security screw
You can use the included security screw kit to lock the SDD/HDD
case so that cannot be removed.
Use a Phillips (+) driver to install/remove the security screw.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info