587269
45
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DA-3000
45
7 – Recording/playback with cascade connections
Using cascaded units
When operating cascaded units, the following general rules
apply to recording and playback.
Playing back both master and slave units
Synchronized playback from both the beginnings and the
middles of tracks is possible.
Master unit
Slave unit
Synchronized playback from beginning
Synchronized playback from middle
Operation:
o Press the master unit PL AY button to start playback of both
master and slave units and its STOP button to stop synchro-
nized playback.
o During synchronized playback, press the master unit PAUSE
button to pause playback.
o Use the master unit m[.]/,[/] buttons to skip
tracks, and press and hold the m[.]/,[/] buttons
to search backward/forward. (See “Skipping to the previous
or next track on page 39.) (See “Searching backward and
forward” on page 39.)
o Press the master unit MULTI JOG dial to add marks to the
master and slave units. (See Adding marks during playback”
on page 40.)
o Turn the MULTI JOG dial to move to marks set on the master
unit. (See “Locating to marks on page 40.)
NOTE
When searching backward/forward, differences in operation
speed might occur between the master and slave units.
Moving to marks set on a slave unit is not possible.
Recording to both master and slave units
Synchronized recording from the beginnings of tracks is
possible.
Synchronized recording starts
Master unit
Slave unit
Operation:
o Press the master unit RECORD [TRK INC] button to put both
the master and slave units into recording standby. Then,
press the master unit PL AY button to start recording. Press
the STOP button to stop synchronized recording.
o During synchronized recording, press the master unit PAUSE
button to pause recording.
o During synchronized recording, press the master unit
RECORD [TRK INC] button to increment the track number
(create a new track and continue recording).
o During synchronized recording, if the master unit auto track
function is set to SIZE, tracks will be incremented automati-
cally. (See “Creating a higher numbered track manually on
page 28.)
o Press the master unit MULTI JOG dial to add marks to
both the master and slave units. (See Adding marks when
recording on page 29.)
Playing back with the master unit and recording with
a slave unit
Playing a track on the master unit from its beginning and simul-
taneous recording on a slave unit is possible.
Master unit
Slave unit
Synchronized playback
Synchronized recording
Operation:
Press the slave unit RECORD [TRK INC] button to put it in
recording standby. Then press the master unit PL AY button
to start master unit playback and synchronized slave unit
recording.
CAUTION
During the above synchronized operation, a recording slave
unit will not synchronize with the following operations
i Pressing a m[.]/,[/] button to skip tracks
i Pressing and holding a m[.]/,[/] button to
search backward/forward
i Turning the MULTI JOG dial to move to a mark
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-3000 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DA-3000

Tascam DA-3000 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info