587269
43
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DA-3000
43
7 – Recording/playback with cascade connections
Connecting and setting the devices
Connect the master and slave devices.
Connect the devices in the following manner according to the
synchronization method.
CAUTION
When installing units on top of each other, leave space
between units to allow good heat dispersal.
When mounting them in a rack, leave at least 1U open
above each unit.
8
Synchronizing using S/PDIF with the master unit as
the clock master
Connections
Use a coaxial digital cable to connect the master unit
DIGITAL OUT to the slave unit DIGITAL IN (S/PDIF /
CASCADE).
When connecting a second slave unit, use a coaxial digital
cable to connect the first slave unit DIGITAL OUT to the
second slave unit DIGITAL IN (S/PDIF / CASCADE).
Master unit
Slave unit 1
Slave unit 2
Settings
Press the MENU button to open the
GENERAL
page of the
menu screen. Set the
CLOCK MSTR
and
CASCADE
items as
follows. (See “Setting the master clock on page 25.) (See
“Setting master and slave units on page 44.)
GENERAL Page
CLOCK MSTR setting CASCADE setting
Master unit Internal MASTER
Slave unit DIN SLAVE
8
Using the master unit as the clock master for word
clock synchronization
Connections
Use a coaxial digital cable to connect the master unit
DIGITAL OUT to the slave unit DIGITAL IN (S/PDIF /
CASCADE) and a BNC cable to connect the WORD SYNC
THRU/OUT to the slave unit WORD SYNC IN.
When connecting a second slave unit, use a coaxial digital
cable to connect the first slave unit DIGITAL OUT to the
second slave unit DIGITAL IN (S/PDIF / CASCADE) and a
BNC cable to connect the first slave unit WORD SYNC THRU/
OUT to the second slave unit WORD SYNC IN.
Master unit
Slave unit 1
Slave unit 2
ON 75Ω/OFF switch
(WORD OUT)
ON 75Ω/OFF switch
(THRU)
In addition, set the 75Ω ON/OFF [THRU/WORD OUT]
switches on the master and slave units as follows.
ON 75Ω/OFF [THRU/WORD OUT] switch
ON 75Ω/OFF THRU/WORD OUT
Master unit ON WORD OUT
Slave unit OFF THRU
Slave unit
(last)
ON WORD OUT
Settings
Press the MENU button to open the
GENERAL
page of the
menu screen. Set the
CLOCK MSTR
and
CASCADE
items as
follows. (See “Setting the master clock on page 25.) (See
“Setting master and slave units on page 44.)
GENERAL page
CLOCK MSTR setting CASCADE setting
Master
unit
Internal MASTER
Slave unit WORD SLAVE
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-3000 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DA-3000

Tascam DA-3000 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info