587269
29
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DA-3000
29
4 – Recording
Setting the automatic mark function
By turning the
AUTO MARK
options ON, marks can be added
automatically whenever the OVER indicator lights or an external
clock synchronization error occurs. Use of this function allows
you to quickly find and check problems that occurred in the
system during recording.
1. Press the MENU button repeatedly to open the
REC FUNC
menu, and turn the MULTI JOG dial to select
AUTO MARK
.
2. Press the MULTI JOG dial to open the
AUTO MARK
screen.
3. Turn the MULTI JOG dial to select the
OVER
item. (When
OVER
is ON, a mark is added automatically whenever an
OVER level meter indicator lights.)
Options: OFF (default), ON
4. Press the MULTI JOG dial to confirm the setting.
The cursor moves to the
UNLOCK
item.
5. Turn the MULTI JOG dial to select
UNLOCK
. (When ON,
marks will be added when the unit unlocks from the external
clock.)
Options: OFF (default), ON
6. Press the MULTI JOG dial to confirm the selection and return
to the menu screen.
NOTE
When an OVER occurs, the Mark name is “OVERxxx” *.
When an UNLOCK even occurs, the Mark name is “UNLKxxx” *.
* “xxx” is a number that increments through all MARKs in
this track.
Adding marks manually during
recording
You can add marks at the positions you want while recording
and use those marks to change positions quickly during track
playback.
NOTE
During recording, adding marks is possible, but moving to
and deleting those marks is not possible. Moving to and
deleting marks is only possible when the track is stopped, in
playback standby or playing back. (See “Locating to marks
on page 40.) (See “Deleting marks” on page 40.)
Adding marks when recording
During track recording, press the MULTI JOG dial (or remote
control MARK button) at any point where you want to add a
mark.
NOTE
A maximum of 99 marks can be added to each track. Mark
information is stored in the track file.
You can also add marks during track playback. (See “Adding
marks manually during playback” on page 40.)
When adding a mark manually, the Mark Name “MARKxxx” *
is used.
* “xxx” is a number that increments through all MARKs in
this track.
Using the oscillator (OSC)
The unit can output a sine wave at a standard level.
You can choose from three output frequencies for the sine wave.
Use this to check connections, for example.
1. Press the MENU button to open the
UTILITY
menu, and
turn the MULTI JOG dial to select
OSC
.
2. Press the MULTI JOG dial to open the
OSCILLATOR
screen.
3. Turn the MULTI JOG dial to select the frequency of the oscil-
lator.
Options: 440Hz, 1kHz (default), 10kHz
4. Press the MULTI JOG dial to confirm the oscillator frequency,
and turn the oscillator ON. A sine wave is output, and the
level meters show the level of the oscillator.
Press the MULTI JOG dial again to turn the sine wave output
OFF or ON again as necessary.
5. Press the EXIT/CANCEL [PEAK CLEAR] button or MENU
button to return to the menu screen.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-3000 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DA-3000

Tascam DA-3000 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info