587269
27
Zoom out
Zoom in
Previous page
1/60
Next page
TASCAM DA-3000
27
4 – Recording
Sync recording
If the sync recording function is on, recording will begin
automatically when the input signal exceeds the level set in
advance (SYNC REC LEVEL).
Activating and setting sync recording
Use the menu to turn the sync recording function on and off and
to set the sync recording level.
1. Press the MENU button repeatedly to open the
REC FUNC
menu, and turn the MULTI JOG dial to select
SYNC REC
.
2. Press the MULTI JOG dial to open the
SYNC REC
screen.
3. Turn the MULTI JOG dial to turn the sync recording function
on or off.
Options: OFF (default), ON
4. Press the MULTI JOG dial to confirm the setting.
If set to ON, the cursor will move to the
LEVEL
item.
If set to OFF, the
REC FUNC
menu screen will reopen.
5. Turn the MULTI JOG dial to select the sync level.
Options: −24dB, −30dB, −36dB, −42dB, −48dB,
−54dB (default), −60dB, −66dB, −72dB
6. Press the MULTI JOG dial to confirm the setting and return
to the menu screen.
NOTE
After recording starts, if the signal stays below the sync level
continuously for 5 seconds, the unit automatically enters
recording standby.
Sync recording starts as soon as the level is detected.
Sync recording operation
When the sync recording function is on and the unit is in
recording standby, recording will automatically start or stop in
response to the level of the input source.
p When a signal higher than the sync level is input, recording
will begin automatically. Recording will automatically stop
when the signal stays below the sync level continuously for
5 seconds. However, recording will not begin even if input
is detected unless there has been at least one second in
which the signal was below the SYNC LEVEL after entering
recording standby.
Level
Time
Recording starts
SYNC LEVEL
p To stop sync recording, set the
SYNC REC
screen
MODE
item to OFF.
If the sync level is too high
If the sync level setting is too high, the beginning of a song that
starts with a low volume might not be captured.
Level
Time
SYNC LEVEL
This part is not
recorded
Recording starts
If the sync level is too low
Sync recording will not begin from recording standby if the
source you are recording has a background noise level that is
higher than the sync level.
Level
Time
SYNC LEVEL
Noise level is higher than the SYNC
LEVEL, so recording never starts
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-3000 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam DA-3000

Tascam DA-3000 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info