587266
23
Zoom out
Zoom in
Previous page
1/28
Next page
TASCAM CG-1800/CG-1000 23
8 – Other functions
Setting the termination for reference
input connectors
Set the termination for each input connector according to the
wiring.
Make these settings on the
TERMINATION
page.
1. Press the MENU button repeatedly to open the
TERMI-
NATION
menu page, and turn the MULTI JOG dial to select
the input connector for which you want to set the termi-
nation.
VIDEO selected
2. Press the MULTI JOG dial to open the
TERMINATION
XXX
screen (“ XXX” is the name of the input connector).
TERMINATION VIDEO
screen open
3. Turn the MULTI JOG dial to set the termination for the input
connector.
Options
Video clock input connector: 75ohm (default), OPEN
Word clock input connector: 75ohm (default), 50ohm,
OPEN
GPS signal input connector: 50ohm (default), OPEN
4. Press the MULTI JOG dial to confirm the selection and return
to the menu.
Setting the levels of the word clock
outputs
You can change the output levels of the word clock outputs.
Change these levels on the
WORD OUT LEVEL
page.
1. Press the MENU button repeatedly to open the
WORD
OUT LEVEL
menu page, and turn the MULTI JOG dial to
select the word clock output connectors for which you want
to set the level.
1/2 selected
2. Press the MULTI JOG dial to open the
WORD OUT
LEVEL 1/2
screen.
WORD OUT LEVEL 1/2
screen open
3. Turn the MULTI JOG dial to set the output level of the word
clock output connectors.
Options: 1.0V, 1.5V, 2.0V, 2.5V (default), 3.0V, 3.5V
4. Press the MULTI JOG dial to confirm the selection and return
to the menu.
Restoring factory default settings
You can restore the various settings saved in this units backup
memory to their factory defaults.
Do this from the
UTILITY 1
page.
See “Default setting values list on page 25 for the settings
when the unit is shipped new from the factory.
NOTE
The
STARTUP
item setting cannot be restored to the
factory default.
1. Press the MENU button repeatedly to open the
UTILITY
1
menu page, and turn the MULTI JOG dial to select the
FACTORY PRESET
item.
2. Press the MULTI JOG dial to open the
FACTORY
PRESET
pop-up.
3. Press the MULTI JOG dial to execute, or press the EXIT/
CANCEL button to cancel.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CG-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CG-1000 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tascam CG-1000

Tascam CG-1000 User Manual - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info