Manual Tascam cdrw900 (page 9 of 32) (English)

161727

Zoom out

Zoom in

1/32

1-Introduction

TASCAM CD-RW900 9

Inserting batteries

1. Open the lid.

2. Conrm +/- polarity, and insert two AAA batteries.

3. Close the lid.

1 − Introduction

Never use a stabilizer or printable discs

Beware of condensation

If the unit (or a compact disc) is moved from a cold

to a warm place, or used after a sudden temperature

change, there is a danger of condensation; vapor in the

air could condense on the internal mechanism, making

correct operation impossible. To prevent this, or if this

occurs, leave the player for one or two hours with the

power turned on, then turn the power off and on again.

Using commercially available CD stabilizers or printable

recordable discs with this player will damage the mech-

anism and cause it to malfunction.

NOTE

Never use a disc that has had a stabilizer mounted to it.

The residual adhesive may cause the disc to stick to the

turntable of the CD-RW900. If it sticks to the turntable,

you will need a technician to get it out.

≠

Do not expose the light-receptive spot to the direct

sunlight or intense lights of an illumination for extend-

ed periods. Long exposure to the lights may result a

failure of the unit functions.

≠

When the remote control will not be used over one

month, please remove the batteries to prevent the

possibility of battery acid leakage which could dam-

age the unit. Should leakage occur, remove and

discard the batteries, and wipe the battery case thor-

oughly with a cloth. Avoid getting the battery liquid

on the skin. After cleaning, replace with new batter-

ies.

≠

The remote control functions by using an infrared

light signal. When using the unit to control the CD-

RW900, other devices that are turned on could be

operated by its signal.

≠

If the range of remote operation becomes smaller, or

commands do not always function properly, the bat-

teries have become weak and should be replaced.

Always replace both batteries with new batteries of

the same type.

≠

Point the remote control to the remote sensor on the

main unit. Do not obstruct the path between the re-

mote control and the remote sensor.

Use of the remote control unit

If batteries are used improperly, or if leakage or break-

age occurs, the unit will not function. Please observe

the cautions indicated on the batteries and their pack-

aging to ensure proper usage.

≠

Conrm + and − polarity and follow the indications

when inserting new batteries into the remote control.

≠

Do not use old and new batteries together.

≠

Even if the battery is the same size, the voltage may

differ. Do not use batteries of different specications

together.

≠

Do not attempt to recharge batteries that are non-

rechargeable.

≠

Do not open or disassemble batteries, throw them

into a re or put them in water.

Batteries

Connections

The following should be noted when you connect the

unit to other equipment.

It is possible to connect the unit’s DIGITAL COAXIAL

IN, DIGITAL OPTICAL IN and ANALOG UNBAL-

ANCED INs (L, R) to other equipment at the same

time. However, the unit can receive signals from only

one digital input at a time.

Currently selected input jack is shown on the display.

Audio signals output from the unit are output from the

analog ANALOG OUT jacks, as well as from the DIGI-

TAL COAXIAL OUT jack and DIGITAL OPTICAL OUT

connector simultaneously (but not from the digital out-

puts in stop mode).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam cdrw900 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam cdrw900 Manual

Product: