490774
40
Zoom out
Zoom in
Previous page
1/52
Next page
40 TASCAM CD-A550/CD-A750
7 – Recording Cassette Tapes
CD DUB key
CD DUB key
The tape automatically rewinds to the start of the A side,
and the tape counter resets to “0000.” The CD pauses at
the beginning of its first track. After the tape records about
eight seconds of silence (to avoid the leader tape), dubbing
starts with the CD beginning playback and the cassette
recorder beginning recording at the same time. (The DUB
indicator appears on the display.)
When the CD playback stops or the tape end is
reached, the tape stops (the tape side end that it
stops at depends on the reverse mode) and dubbing
ends.
When dubbing in two-side recording mode, if the
last track being recorded to the first side of the tape
is not recorded completely before the operation
direction reverses, that track is recorded again from
its beginning on the second side of the tape.
When dubbing in two-side recording mode, nothing
is recorded for eight seconds after the operation
direction is reversed. (CD playback pauses while the
cassette recorder continues in record mode.)
Press the TAPE or CD STOP key to stop dubbing at
any time.
Adjusting the record level when dubbing
The recording level is automatically set when dubbing a
CD to a tape by default, but the record level can be adjusted
with the
INPUT
knob when dubbing.
1 Set "CD" as the recording source. (See “Selecting
the recording source” on page 38.)
2 When in standard display mode, press the MENU
key on the main unit or the remote control to enter
menu mode.
3 Use the /+ keys on the main unit or the remote con-
trol to show "
DUB LEVEL?
" on the main display,
and press the ENTER key on the main unit or the
remote control.
4 Use the /+ keys on the main unit or the remote con-
trol to select “VARI.
Options: FIX (default value), VARI
5 Press the ENTER key on the main unit or the remote
control to return to the standard display.
6 Press the RECORD key on the main unit or the
remote control to make the unit record ready and
enable monitoring of the recording source.
7 Play the CD and observe the recording level meters
on the display.
8 Use the INPUT knob to adjust the recording level.
(See “Recording” on page 39.)
9 Press the CD STOP key to stop the CD and the TAPE
STOP key to take the unit out of record ready mode.
10 Press the CD DUB key on the main unit or the
remote control to conduct dubbing in the same way
as described above in “Basic dubbing.
Using the TAPE EDIT function
Using the TAPE EDIT function, this unit can follow an
automatically prepared program and dub a CD according to
the tape length.
With the TAPE EDIT function, starting with the first track,
CD tracks that total less than the length of the tape side are
recorded in order to the A side of the tape. Then, recording
continues from the next track in order to the B side.
1 When CD playback is stopped, press the TAPE EDIT
key on the remote control to enter TAPE EDIT
mode. The main display appears as shown below.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-A750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-A750 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info