490774
38
Zoom out
Zoom in
Previous page
1/52
Next page
38 TASCAM CD-A550/CD-A750
7 – Recording Cassette Tapes
This unit can record to cassette tapes. The following
procedures explain how to prepare for recording by setting
the reverse mode and Dolby NR and selecting the input and
then actual recording. This explanation assumes that the
unit’s power is ON and that a recordable (write-protect tabs
not removed) cassette tape has been loaded already.
Preparing to record
Selecting the reverse mode
REV MODE switch
Use the
REV MODE
switch to set the unit to record on one
or both sides.
Ë: After recording on both A and B sides, the unit
stops.
ï: After recording on either the A or B side, the unit
stops.
If ä is selected, the unit functions as though Ë had
been selected. In other words, after recording on both A
and B sides, the unit stops.
Turning Dolby NR ON and OFF during recording
DOLBY NR switch
Turn the DOLBY NR switch on the main unit ON to
record with Dolby (B Type) noise reduction.
Selecting the recording source
Using the INPUT key on the remote control
ª
The remote control INPUT key can be used to select
the input source. Press the key repeatedly to cycle
through the input sources.
The active input source appears on the main area of the
display.
INPUT key
INPUT CD
: the playback signal from this unit’s CD
player
INPUT UNBAL
: the signal input through the
TAPE
INPUT (UNBALANCED)
jacks on the rear panel
INPUT BAL
(CD-A750 only): the signal input through
the
TAPE INPUT (BALANCED)
jacks on the rear panel
Using the menu
ª
You can also use the menu to set the record source signal
(input source).
1 When in standard display mode, press the MENU
key on the main unit or the remote control to enter
menu mode.
2 Use the /+ keys on the main unit or the remote con-
trol to show “
TAPE INPUT?
” on the main dis-
play, and press the ENTER key on the main unit or
the remote control.
3 Use the /+ keys on the main unit or the remote con-
trol to select the input source from the following
options.
CD
: the playback signal from this unit’s CD player.
UNBAL
(default value): the signal input through the
TAPE INPUT (UNBALANCED)
jacks on the rear panel
BAL
(CD-A750 only): the signal input through the
TAPE INPUT (BALANCED)
jacks on the rear panel
4 Press the ENTER key on the main unit or the remote
control to return to the standard display.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-A750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-A750 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info