587259
32
Zoom out
Zoom in
Previous page
1/40
Next page
32 TASCAM CD-6010
7 – Other Functions
Changing the playback time
display mode
You can select the playback time that is shown on the
display.
During playback or when paused, press the DISPLAY
[LOCK] button on the player or the DISPLAY button on
the remote. Each press of the button cycles through the
three types of time display. The currently selected display
mode is shown in the playback time mode display area.
T.REMAIN
: total remaining time is displayed
REMAIN
: remaining time of the current track is
displayed
Nothing: elapsed time of the current track is displayed
NOTE
When an audio CD is stopped, the total recording time is
always shown regardless of whether or not T.REMAIN or
REMAIN appears.
For data CDs, neither the total time when stopped,
nor the remaining time or total remaining time during
playback are shown. (Only the number of tracks or track
number appears.)
In program playback mode, remaining time shows
the time until playback of the program ends. In single
playback mode, remaining time shows the remaining
time in the track.
In program playback mode, the total time shown is for
the program.
The playback time display mode setting is retained even
when the power is turned off.
Frame time display setting
You can set whether or not the frame time is shown
during playback. To set the frame time display, use the
17
FRAM
menu item (default value:
ON
).
NOTE
The frame time display on/off setting is retained even when
the power is turned off.
End of track warning
(TRACK EOM)
When nearing the end of a track, an end of track warning
indication can be shown on the display and a “21 EOM
TRACK TALLY" signal can be output from the CONTROL I/
O PARALLEL connector. With data CDs, an end of track
warning will not appear on the display. The CONTROL I/O
PARALLEL “21 EOM TRACK TALLY" signal will be output as
a pulse when the file playback ends.
By setting in advance the number of seconds before
the track end that the warning is shown, when playback
reaches that point, the
:
in the time display will begin
blinking. At the same time the CONTROL I/O PARALLEL
“21 EOM TRACK TALLY" signal will be output.
MS
F
Use the
10 EOM_T
menu item to set the value from
among the following options.
Options:
OFF
,
0
,
5
,
10
,
15
,
20
,
25
,
30
(default value),
35
For values other than
OFF
, the number indicates the
number of seconds before the end of the track that the
warning begins. However, when set to
0
, no warning will
be shown on the display when track playback ends, but
a “21 EOM TRACK TALLY" signal will be output from the
CONTROL I/O PARALLEL connector as a pulse.
At the default value, 30 seconds before the end of the
track, the
:
begins to blink and the CONTROL I/O
PARALLEL “21 EOM TRACK TALLY” signal is output
NOTE
The TRACK EOM function setting is retained even when the
power is turned off.
End of disc warning (Disc EOM)
You can set the unit to output a “23 EOM DISC TALLY"
signal from the CONTROL I/O PARALLEL connector when
nearing the end of a disc a few seconds before it ends.
Use the
06 EOM_D
menu item to set the time of the
EOM function.
Options:
OFF
,
0
,
5
,
10
,
15
,
20
,
25
,
30
(default value),
35
For values other than
OFF
, the number indicates the
number of seconds before the end of the disc that the
warning begins. When set to
0
, a “23 EOM DISC TALLY"
signal will be output from the CONTROL I/O PARALLEL
connector as a pulse when disc playback stops.
NOTE
The DISC EOM function setting is retained even when the
power is turned off.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-6010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-6010 in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info