587259
31
Zoom out
Zoom in
Previous page
1/40
Next page
TASCAM CD-6010 31
6 – Various Playback Functions
Flash-loading cue points:
ª
Set cue points are loaded into memory.
NOTE
The flash start function is only possible with audio CDs.
The flash start function is not possible with data CDs.
When playing back using the flash start function, the
auto-cue and auto-ready functions are disabled.
Using the front panel buttons:
1 To use a program to flash start tracks, program the
tracks in advance and set the playback mode to
program playback. To flash start using cue points,
set the cue points in advance and turn the cue mode
ON (CUE indicator appears).
2 Press the FLASH button.
3 While the beginnings of the tracks or cue points are
being loaded into memory, the word
FLASH
blinks
on the display. After loading completes,
FLASH
01-10
appears on the display, the FLASH indicator
lights and the Á PLAY indicator blinks.
4 Press the number button for the program number
(when program set), track number (when program
not set) or cue number (for cue point flash start) that
you want to play.
To select numbers between 11 and 20, press the
+10 button, so that
FLASH 11-20
appears on the
display, and then press the corresponding number
button. Press the +10 button again to return to
FLASH 1-10
.
Using the remote control:
1 To use a program to flash start tracks, program the
tracks in advance and set the playback mode to
program playback. To flash start using cue points,
set the cue points in advance and turn the cue mode
ON (CUE indicator appears).
2 Press the FLASH button.
3 While the beginnings of the tracks are being loaded
into memory, the word
FLASH
blinks on the display.
After loading completes,
FLASH 01-10
appears
on the display, the FLASH indicator lights and the Á
PLAY indicator blinks.
4 Press the number button for the program number
(when program set), track number (when program
not set) or cue number (for cue point flash start) that
you want to play.
To select numbers between 11 and 20, press the
CLEAR button, so that
FLASH 11-20
appears
on the display, and then press the corresponding
number button. Press the CLEAR button again to
return to
FLASH 1-10
.
Exiting flash start mode
ª
Press the FLASH button on the unit or the remote
control. The FLASH indicator will become unlit.
Relay playback
Multiple CD-6010 units can be used together and set
so that when playback ends on one unit, playback can
automatically start on another unit.
To do this, connect the CONTROL I/O PARALLEL
connector "23 EOM DISC TALLY" pin on the rear panel
of one unit to the CONTROL I/O PARALLEL connector
"2 PLAY" pin on another unit with a cable and set
DIS C
EOM
to
0
on both units. (See "End of disc warning (DISC
EOM)" on page 32.)
By connecting two CD-6010 units in both directions as
shown in illustration below, alternating playback between
them is possible.
By connecting three or more CD-6010 units in sequence
(CONTROL I/O PARALLEL "2 PLAY" to CONTROL I/O
PARALLEL "EOM DISC TALLY") as shown below, automatic
playback of one unit after the other is possible.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-6010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-6010 in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info