587254
25
Zoom out
Zoom in
Previous page
1/48
Next page
TASCAM CD-200SB
25
4 – Playback
Setting the program
When no program is set, follow the procedures below to set a
program using the remote control.
You can set programs independently for each type of media (CD/
SD card/USB flash drive).
NOTE
The program cannot be set from the main unit.
You can set a program at any time regardless of the current
playback mode.
The maximum number of tracks that can be programmed
with data CDs, SD cards and USB flash drives is 999.
CD programs are cleared when the disc tray is opened or the
current folder is changed.
SD card and USB flash drive programs are cleared when the
media is disconnected. Programs are also cleared when the
dubbing (copying) or folder erase function is used, when the
current folder is changed and when direct folder playback is
used in program playback mode (
PROG
indicator appears).
1. Press the remote PROGRAM EDIT button when playback is
stopped.
The unit enters program setting mode. If no program has
been set, it will be possible to choose a track for program
step 01 (
PROG
indicator blinks).
Audio CD example
USB flash drive example
NOTE
If the program is already set, the track number of the track set as
program step 01 is shown.
2. Use the remote number (1–10/0) buttons or search
(m/. [SELECT 5] and //, [SELECT b]) buttons
to select a track to set as program step 01 (
PROG
and the
track number blink).
Use the number (1–10/0) buttons to input the number
starting with the largest digit.
Track number Playback time
Audio CD example
USB flash drive example
NOTE
When using a data CD, SD card or USB flash drive, the
screen switches to file name display if more than a second
passes after pressing one of the remote number (1–10/0) or
search (m/. [SELECT 5] and //, [SELECT b])
buttons, but you can still add the track to the program.
If you press the STOP button while a track is selected,
selection of that track is canceled, and the screen returns to
the state where you can select a track.
3. Press the remote PROGRAM EDIT button to add the
selected track as program step 1.
4. The unit is now ready for you to add another track as the
next program step.
5. If you are finished adding tracks to the program, press the
remote PROGRAM EDIT button when the empty program
step is shown.
The unit exits program setting mode.
NOTE
The same track can be added to the program multiple times.
If you press the STOP button when the empty program step
where it is possible to add a track appears, all steps in the
program are cleared.
If you try to add more than 99 tracks, a
PGM FULL
error
message appears. Only 99 tracks can be added.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200SB in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info