587254
24
Zoom out
Zoom in
Previous page
1/48
Next page
24
TASCAM CD-200SB
4 – Playback
Folder playback (data CDs/SD cards/
USB flash drives)
With data CDs, SD cards and USB flash drives, you can set the
selected folder (current folder) as the playback area. Follow the
procedures below to set the playback folder. You can also set the
playback area to be all the tracks/files on the current media by
selecting
ALL PLAY
.
Setting the playback folder
1. While pressing and holding the main unit DISPLAY [SHIFT]
button, press the PLAY MODE/INTRO CHECK [PLAY AREA]
button (or press the remote PLAY AREA button) to set the
playback area to
FOLDER
.
2. Use the main unit FOLDER g/t [PITCH −/+, / ] buttons
or the remote FOLDER g/t [ / ] buttons to skip to the
previous or next folder.
This will skip to the beginning of the first track in the
previous or next folder. If you hold down one of these
buttons, you can skip through folders continuously in order.
NOTE
When you skip to a different folder, it becomes the current
folder.
During folder playback, repeat playback will play back all
tracks inside the current folder repeatedly.
During folder playback, random playback will play back all
tracks inside the current folder randomly.
Programmed playback
To use programmed playback, you must set a program either
before or after setting the playback mode to programmed
playback mode. (See “Selecting the playback mode on page
22.)
When in programmed playback mode, press the PLAY/PAUSE
button on the main unit or the remote control to start playback
of the set program in order from the first track (program step
01).
Press the main unit SEARCH m/, [.//, SELECT 5/
b] button or the remote search (m/. [SELECT 5] or
//, [SELECT b]) button to skip to the previous or next
program step.
When playback is stopped in program playback mode using an
audio CD, the total number of tracks in the program and the
total program time are shown.
When using a data CD, only the program number is shown.
When using an SD card or USB flash drive, the number and time
of the track being played back are shown.
NOTE
To select programmed playback, when stopped, press the
main unit PLAY MODE/INTRO CHECK [PLAY AREA] button
or the remote PLAY MODE button.
When using a data CD, SD card or USB flash drive, you
cannot set a program when the playback area is
ALL PLAY
.
Change the playback area to
FOLDER
to enable tracks in the
current folder to be used in the program.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200SB in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info