587251

Tascam CD-200i Manual

27
Zoom out
Zoom in
Previous page
1/36
Next page
TASCAM CD-200i
27
4 − Playing Back CDs
If you press the STOP key when the empty program
•
step where it is possible to add a track appears, all
steps in the program are cleared.
If you try to add more than 99 tracks, a “PGM FULL”
•
error message appears. Only 99 tracks can be added.
Checking the program
You can check the contents of the program.
1 Press the PROGRAM EDIT key on the remote control
while playback is stopped to put the unit into pro-
gram setting mode.
The track number and playback time of the track set as
program step 01 is shown on the screen (playback time
is not displayed if the loaded disc is a data CD) and
MEMORY
blinks.
Program step
Playback time
Track number
2 Press the PROGRAM EDIT key to show the track
information of the next program step.
3 If you press the PROGRAM EDIT key when the final
program step is shown, it becomes possible to add
another program step. (No track number is dis-
played and the MEMORY indicator blinks.)
4 Press the PROGRAM EDIT key again to exit the pro-
gram setting mode.
Replacing a program track
You can replace a track that has already been added to the
program.
1 Press the PROGRAM EDIT key on the remote control
while playback is stopped to put the unit into pro-
gram mode.
2 Follow the steps in “Checking the program” above
and press the PROGRAM EDIT key to show the pro-
gram step with the track that you want to replace.
3 Use the numeric keys or skip (Ô/Â, ¯/)
keys to select the desired track and press the
PROGRAM EDIT key.
After replacing a track, the display shows the empty
step at the end of the program and you can add
another track to the end of the program if desired.
4. Press the PROGRAM EDIT key again to exit pro-
gram setting mode.
Adding more program tracks
You can add tracks to the end of an already set program.
1. Press the PROGRAM EDIT key on the remote control
while playback is stopped to put the unit into pro-
gram setting mode.
2 Press the PROGRAM EDIT key until the empty
program step where it is possible to add a track
appears. (No track number is displayed and the
MEMORY indicator blinks.)
3 Use the numeric keys or skip (Ô/Â, ¯/)
keys to select a track and press the PROGRAM EDIT
key.
4 In this state, you can repeat step 3 to add more
tracks, or you can press the PROGRAM EDIT key to
exit program setting mode.
CAUTION
Although tracks can be added to the end of a
•
program and tracks can be replaced with different
tracks, tracks cannot be inserted into the middle of a
program.
If you want to insert a track into the middle of the
•
program, replace and add program tracks to alter
the program contents.
Clearing the program
You can clear the entire program that has been set.
1 Press the PROGRAM EDIT key on the remote control
while playback is stopped to put this unit into pro-
gram setting mode.
2 Press the PROGRAM EDIT key until the empty pro-
gram step appears. (No track number is displayed
and MEMORY blinks.)
3 Press the STOP key. “-CLEAR-” appears on the
display. After the program is cleared, program set-
ting mode resumes without any tracks added to the
program.
In addition to the above procedure, opening the disc
tray also clears the program.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200i in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info