587251
26
Zoom out
Zoom in
Previous page
1/36
Next page
26
TASCAM CD-200i
4 − Playing Back CDs
To select programmed playback, press the PLAY
MODE/INTRO CHECK (SOURCE SEL) key on the main
unit or the PLAY MODE key on the remote control
when playback is stopped or no CD is loaded.
During folder playback, only tracks in the current
folder can be included in a program.
Setting the program
When no program is set, follow the procedures below to set
a program using the remote control.
The program cannot be set from the main unit.
You can set a program at any time regardless of the
current playback mode.
The program is cleared when the disc tray is opened.
1 Press the PROGRAM EDIT key while playback is
stopped.
PROGRAM
EDIT key
The unit enters program setting mode, and if no program
has been set, it will be possible to set a track to program
step 01 (MEMORY indicator blinks).
[Audio CD]
[Data CD]
If the program is already set, the track number and
playback time of the track set as program step 01 is
shown.
2 Use the numeric keys or search (Ô/Â, ¯/)
keys to select a track to set as program step 01.
(The MEMORY indicator and the track number blink.)
When using the numeric keys, input the number
starting with the leftmost digit.
Program step
Playback time
Track number
[Audio CD]
[Data CD]
When using a data CD, the screen switches to
file name display if more than a second passes
after pressing a numeric key or search (Ô/Â,
¯/) key, but it is still possible to add the track
to the program.
If you press the STOP key while a track is selected,
selection of that track is canceled, and the screen
returns to the state where you can select a track.
3 Press the PROGRAM EDIT key.
The selected track is added to program step 01. The unit
is now ready for you to add another track for the next
program step.
4 By repeating steps two and three above, you can add
more tracks sequentially as desired.
5 If you are finished adding tracks to the program,
press the PROGRAM EDIT key when the empty
program step where it is possible to add a track
appears. The unit exits program setting mode.
The same track can be added to the program
multiple times.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam CD-200i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam CD-200i in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info