630219

Targa CR 1.0A1 - IAN 106751 Dashcam Manual

33
Zoom out
Zoom in
Previous page
1/189
Next page
CR 1.0 A1
English - 31
3. Press the + (18) or – (17) button several times to select the "Playback" function.
4. Press the OK button (12) to enable the playback function.
Further information can be found in the "Playback" section on page 25 and in "The playback
menus" section on page 37.
FlashLight
Thanks to your Dashboard Camera's 4 white LEDs (8), the device can also be used as a flashlight.
How to switch the 4 white LEDs (8) on or off:
1. Power the Dashboard Camera on by pressing and holding the On/Off button (14) for approx.
3 seconds.
2. If the Dashboard Camera is connected using the car charger, press the Return button (16) to
display the main menu. Otherwise, continue with step 3.
3. Press the + (18) or – (17) button several times to select the "FlashLight" function.
4. Press the OK button (12), select the desired option by pressing the – button (17) and then
press the OK button (12) to confirm:
Off: Turns the flashlight function off.
Always Bright: Turns the flashlight function on.
One Second Flash: Turns the flashlight function on. The 4 white LEDs (8) then flash once a
second. This mode saves the battery.
If you have enabled the "Auto Power Off" option in the "Setup" menu, the flashlight will
also power off after the set time.
Setup
The setup menu contains basic settings for your Dashboard Camera. These include date and time,
idle time before automatic shutdown (power-saving function), key press confirmation sound, on-
screen menu language, image rotation, formatting function for the inserted SD memory card,
factory settings restore and firmware version information.
Setting Description
Date/Time
Set the date and time (see also "Setting the date/time" on page 19).
Auto Power Off
You can set the device to power off automatically after a certain time
to save power. If no buttons are pressed during the preset time, the
device powers off automatically. The Dashboard Camera can then be
switched on again using the On/Off button (14).
… 33 …


Need help? Post your question in this forum.

Forumrules
1

Forum

targa-cr-1.0a1---ian-106751-dashcam

Reset search

  • Can I teplace battery in Targa CR1.0A1.It is possible to open the camera by cudtomer? Submitted on 17-5-2023 at 17:30

    Reply Report abuse

  • Been on charge over night, powered on and got message low power and shut down.....can you get a replacement battery for this camera...ta Submitted on 23-9-2018 at 11:51

    Reply Report abuse

  • My charger cable had broken and will not power the camera. Do you have replacement leads? Submitted on 15-2-2017 at 18:22

    Reply Report abuse

  • where can i get rechargible battery jinke li-ion jk 403035 measuring 30 by 30 mm,or similar for this dash cam. cr 1.0a1 Submitted on 11-2-2017 at 01:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Targa CR 1.0A1 - IAN 106751 Dashcam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Targa CR 1.0A1 - IAN 106751 Dashcam in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info