630219

Targa CR 1.0A1 - IAN 106751 Dashcam Manual

31
Zoom out
Zoom in
Previous page
1/189
Next page
CR 1.0 A1
English - 29
Menus
The Dashboard Camera has various menus that provide various settings for the different modes.
There is also a setup menu allowing you to set the preferences for your Dashboard Camera.
Main menu
In the main menu you can access the desired recording function, playback function and the Setup
menu for your Dashboard Camera. There is also a flashlight function available here so that the
Dashboard Camera can be used as a light in the dark.
1. Power the Dashboard Camera on by pressing and holding the On/Off button (14) for approx.
3 seconds.
2. If the Dashboard Camera is connected to the car charger, press the OK button (12) to stop
recording and then the Return button (16) to show the main menu. Otherwise, continue with
step 3.
3. Press the + (18) or – (17) button several times to select the desired function.
4. Press the OK button (12) to enable the selected function.
The available functions are described in the sections below.
Loop recording
Loop recording is a function in which video clips of a certain length (e.g. 5 minutes) are recorded.
After that recording time, a new video file is automatically created. As you record videos, the
optional microSD memory card fills up. Once the storage space has been used up, the oldest
video in the current recording is automatically overwritten. This ensures that recording is always
possible, even when the storage space has actually all been used up.
In this mode, you should ensure that any recordings you wish to keep are either protected (see
"Protecting videos from being overwritten during loop recording" on page 23) or transferred to a
different storage medium (e.g. your PC, see "Transferring recordings to a computer" on page 39).
1. Power the Dashboard Camera on by pressing and holding the On/Off button (14) for approx.
3 seconds.
2. If the Dashboard Camera is connected using the car charger, press the Return button (16) to
display the main menu. Otherwise, continue with step 3.
3. Press the + (18) or – (17) button several times to select the "Loop recording" function.
4. Press the OK button (12) to enable loop recording.
… 31 …


Need help? Post your question in this forum.

Forumrules
1

Forum

targa-cr-1.0a1---ian-106751-dashcam

Reset search

  • Can I teplace battery in Targa CR1.0A1.It is possible to open the camera by cudtomer? Submitted on 17-5-2023 at 17:30

    Reply Report abuse

  • Been on charge over night, powered on and got message low power and shut down.....can you get a replacement battery for this camera...ta Submitted on 23-9-2018 at 11:51

    Reply Report abuse

  • My charger cable had broken and will not power the camera. Do you have replacement leads? Submitted on 15-2-2017 at 18:22

    Reply Report abuse

  • where can i get rechargible battery jinke li-ion jk 403035 measuring 30 by 30 mm,or similar for this dash cam. cr 1.0a1 Submitted on 11-2-2017 at 01:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Targa CR 1.0A1 - IAN 106751 Dashcam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Targa CR 1.0A1 - IAN 106751 Dashcam in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info