GB GB
1514
Power Supply
(1) Turn the scale upside-down,
and turn the finger screw on
t
he battery cover counter-
c
lockwise (as indicated) to
release the screw.
Image
How to Set Up Correctly
Use the scale in a firm, flat and stable location.
• Do not position it anywhere that is subject to direct
sunlight, near heating equipment, or directly in the
path of an air conditioner outlet.
• D
o not use it anywhere that is subject to significant
temperature change.
• D
o not position it anywhere that is either damp or
subject to high humidity.
• After positioning the scale, gentry lift the baby basket
from both sides to confirm that it is locked into place.
•
Ensure that the lever is pushed in.
Using batteries
Level gauge Check
<View from above>
Red
Air bubble
•Place the scale on a flat surface to ensure
accurate measurement.
•Turn the four adjusters such that the air bub-
ble in the level guide is positioned exactly in
t
he centre. Confirm that all four adjusters
are in contact with the surface.
Level gauge
Adjusters (4)
Using the AC adapter
(1) Insert the AC adapter jack into the AC
adapter inlet on the right side of the main
unit.
(2) Plug the AC adapter into the power outlet.
This equipment must be used
with the included AC adapter
(Model : A30930G).
Caution
(2) Lift off the battery cover. (3) Insert new batteries.
•When the batteries start to run low, appears
on the display panel as a warning.
Al
l (four) batteries should be immediately
replaced with new ones at the same time.
Note) Do not use a combination of alkaline and
m
anganese batteries, as such an arrangement
may result in equipment failure.
N
ote) Rechargeable batteries are NOT recom-
mended.
•
A set of standard batteries should last about
one year (assuming four readings a day).
* Insert the batteries
such that the negative
t
erminals of the batter-
i
es are pushed up
against the coils within
the battery housing.
