656212
6
Zoom out
Zoom in
Previous page
1/19
Next page
11
Prior to Use
10
Prior to Use
Before You Start
Charging the Battery (main unit)
Caution
Always use the dedicated AC adapter and AC cord.
Use of other adapters may result in damage or fire.
Warning
Inserting batteries incorrectly may result in overheating of the impedance meter. Do not use the
impedance meter when it has overheated.
Inserting Batteries (Impedance Meter)
Replacing Batteries
Please replace all four batteries should
the green ‘Power’ LED not come on
when the impedance meter is removed
from the main unit.
Note: Do not use rechargeable
batteries.
Note: Never use a combination of
alkaline and manganese batteries.
Note: The batteries that come with the unit were inserted at the
time of leaving the manufacturing plant. As such, they may have
a limited life.
The life of the batteries is approximately two years (using the
unit five times/day).
Note: This may differ according to measuring methods used.
Disposing of used batteries.
Please dispose of used batteries in accordance with the
regulations of your local governing body.
2. Loosen screws
3. Turn over to front side
and remove the cover
1. Turn over
Image only
Please…
Charge the battery immediately after purchase.
The main unit cannot measure during charging.
Remove the AC adapter from the main unit when:
taking measurements
•moving the main unit
charging is complete
4. Insert batteries
1. Insert the AC adapter jack into the AC adapter connection on the main
unit.
2. Plug the AC adapter into the power point.
The battery will fully charge in approximately 2 hours.
•A fully charged battery will last for approximately 1000 measurements (although this may differ
according to how measurements are conducted.
The remaining battery level is displayed in ‘Battery Level’ when the unit is turned on (see page 9).
Recharge when the battery level gets low.
3. Remove the AC adapter from the main unit when charging is complete.
Green light flashes on and off during battery
charging, and will be on when charging is
complete.
*Please use LR03 alkaline
batteries
*Insert batteries so that the flat
surface of the minus pole
touches the tip of the spring.
5. Close cover
Tighten screws
Power LED
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita AB-140M - Abdominal Fat Analyser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita AB-140M - Abdominal Fat Analyser in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info