54
Prior to Use
Prior to Use
For Your Safety
Caution
Take care near water.
To avoid damage, do not use this device near water or other places where it may get
wet.
To avoid injury, do not insert fingers into gaps and holes.
Avoid impacts on the display.
The acrylic screen may split and cause injury.
Quickly remove moisture from the display screen to avoid, deformity, colour change,
staining and fading.
Wipe over the impedance meter electrodes with disinfectant (alcohol, etc.) prior to
measuring.
This is to avoid the transmission of disease when the meter is placed on the abdomen.
Use only the dedicated AC adapter and cord.
The use of other adapters/cords may result in damage or fire.
Ensure disabled persons do not attempt to use the equipment by themselves.
A companion must perform the measurements.
Continually monitor both the subject and the equipment for anomalies.
Should an anomaly with the subject or the equipment be discovered, take appropriate action, such as
stopping the equipment, while ensuring the safety of the subject.
Do not expose items sensitive to magnetic forces to the equipment.
Exposing items that may be affected by the magnetic force of the magnet on the impedance meter (floppy
disks, USB memory sticks, etc.) may result in corruption of data.
Avoid using on subjects with allergies to metals.
Allergic reactions may be caused by the stainless steel used in the electrodes of this device.
always adhere to the following (cont’d)
Prohibited
Always…
Laser Security
Caution
Specifications
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Always…
Viewing the laser output with certain optical instruments (for example, eye loupes,
magnifiers and microscope) within a distance of 100mm may pose an eye hazard.
Do not shine the laser beam directly into the eyes.
Damage to eyesight may occur.
Prohibited
Warning
An explanation label
As for a label attached position, refer to “Parts and Attachments” (
P.8).
Beam Divergence
About 90˚
Beam size
At a distance of 200mm: minimum line length 200mm; light width max.
2mm
Point ± 5mm from the centre (point is approx. Ø 2).
Classification
Class 1M laser product (EN60825-1 (1994) + A2 (2001) + A1 (2002))
(IEC60825-1 (2001))
Laser
(for positioning)
Light emitter
Visible light semiconductor laser
Laser wavelength
Wavelength: 650 nm (red light)
Laser output
Max. 1mW
Laser Diode
DL–3147–031 (Made in SANYO Electric Co., Ltd.)
Short wavelength=650nm, Light Output Po=5mW (only the LD)
