540609
39
Zoom out
Zoom in
Previous page
1/43
Next page
37
GB
Error Messages
Solution1
1 Check the cable and plug contacts in
the computer and the mag unit. They
could be dirty, oxidised or bent.
2 Grand Excel works properly between
220 and 230 V/50Hz.
3 The lid of the mag unit should be
replaced.
4 The print plate should be replaced.
1 Replace the chain.
2 Make sure the rear tyre pressure is
good.
3 The mag unit will be warm after about
three minutes of cycling.
4 Use Excel at ambient temperatures
between 5°C and 35°C (40°F and
95°F).
5 > See 4 Starting the Training
1 Connect the sensor or install a good
magnet.
2 Make sure that the distance between
the sensor and the magnet is about
3 mm.
3 Connect a new sensor.
4 Check whether the plug is completely
in the connection.
1 Check the cable and the plug contacts
in the computer and the unit. They
could be dirty, oxidised or bent.
2 Adjust the mag unit with the adjust-
ment knob, so that the tyres cannot
slip.
3 A new print plate will have to be
installed in the magnet unit.
Potential problem
1 The mag unit does not brake
properly or at all.
2 The mains voltage is too low.
3 Several magnets of the mag
unit are loose due to having
been dropped.
4 The print plate of the mag
unit is burned out.
1 The bike chain is worn.
2 Tyre pressure is too low.
3 The mag unit is not yet
warm.
4 The ambient temperature is
too low.
5 The program did not start up
properly.
1 The cadence sensor has not
been connected or the mag-
net has fallen out of the mag-
net holder.
2 The sensor was installed out
of range of the magnet.
3 There is a break in the
cadence sensor cable.
4 The sensor plug is not con-
nected properly to the mag
unit.
1 The speed impulses do not
reach the computer.
2 The bike wheel does not
reach the mag unit roller.
3 The speed sensor in the mag
unit is defective.
Failure
6 Cycling power
seems less than
shown on the dis-
play
7 Cycling power
seems higher than
shown on the dis-
play
8 The pedalling fre-
quency remains
zero
9 The cycle speed
remains zero
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tacx Grand Excel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tacx Grand Excel in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tacx Grand Excel

Tacx Grand Excel User Manual - German - 44 pages

Tacx Grand Excel User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info