6975
18
Zoom out
Zoom in
Previous page
1/28
Next page
10.INSPECTION AND MAINTENANCE BEFORE RIDING
DISK BRAKE INSPECTION (Applicable for model equipped with disc brake.)
Visual check brake lines for leakage, or damage,
check brake lines connections for looseness
using a wrench or similar tool, and check whether
steering handle vibration in riding, or any parts'
interference may have damage the brake lines. If
so, bring your scooter to your SANYANG dealer
for repairing or service.
Checking front brake lining Checking oil quantity in brake oil reservoir
Check the brake from behind the brake caliper.
The brake pad must be replaced with new lining
when the brake pad wear limit reaches the
brake disk.
Park the scooter on a level ground, and check if
fluid level is under the “LOWER” mark.
Recommended Brake Fluid: WELL RUN
BRAKE OIL (DOT 3).
Replenishment of front wheel brake fluid
1.Loosen the screws and remove the master cylinder
cover.
2. Wipe clean foreign materials , dirt around the
reservoir, being careful not to let foreign materials fall
into the reservoir.
3. Remove the diaphragm plate and the diaphragm.
4. Add brake fluid to upper level.
5. Install the diaphragm plate and the diaphragm, and
install the master cylinder cover.
6. Please note the diaphragm direction, and do not let
foreign materials fall into the reservoir. And tighten
the master cylinder cover securely.
18
CAUTION:
Please drive your scooter on a dry road surface
slowly and operate front and rear brakes in order
to find out if there is any malfunction so as to
ensure the scooter is at its optimum condition and
safe to ride.
Brake pad wear limit
grooves
Brake diskBrake caliper
CAUTION:
To prevent chemical reaction, please do not use brake fluids other than those recommended.
Do not fill above the upper limit when adding brake fluid and avoid dropping on painting or plastic
components to prevent damage.
Upper
Brake fluid
Diaphragm
Master cylinder
cover
Screw
Hose connection
(Leak, damaged, looseness of brake line)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym Euro MX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym Euro MX in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info