11971
25
Zoom out
Zoom in
Previous page
1/56
Next page
PLAYBACK
NORMAL PLAYBACK
Make sure ...
The unit must be turned on.
1 Insert a prerecorded tape
If the erase-prevention tab has been removed, the
unit will start playback automatically.
2 To begin playback
Press [PLAY O].
3 To stop playback
Press [STOP C].
NOTES:
Even in the DVD mode, you can start the VCR
playback if you press [
B
PLAY] (of the TV/VCR
side).
VCR playback will stop and the mode will change
to the DVD mode by pressing [SELECT],
[
B
PLAY] (DVD side) or [
A
OPEN/CLOSE].
TV/VCR
TRACKING ADJUSTMENT
Tracking adjustment will be set automatically
(Digital Tracking function) when you start play-
back.
Noise lines (black and white streaks) may appear
on the playback picture when playing pre-recorded
tapes or tapes recorded on other VCR. If this
occurs, use [CH.
K
/
L
] until the streaks disappear.
You can reduce the noise lines by using
[CH.
K
/
L
] in the slow mode too. Tracking
adjustment in the slow mode will not be set auto-
matically.
To return to the Digital Auto Tracking function,
stop the tape once and start playback.
TV/VCR
PLAY
B
STOP
- 25 - EN
STILL PICTURE
You can view a still picture on the TV screen during
playback (the still mode). Press [PAUSE F] during
playback. Only tapes recorded in the SLP mode will
show the least amount of lines. Press [PLAY O] to
return to playback.
NOTES:
You can advance the picture one frame at a time by
pressing [PAUSE F] during the still mode.
If it is left in the pause mode for more than 5 min-
utes, the unit will automatically switch to the stop
mode.
TV/VCR
SLOW MOTION
Press [PAUSE F], then press [D] to start the play-
back in slow motion. The unit mutes the sound dur-
ing slow motion. Press [PLAY O] to return to nor-
mal playback.
NOTE:
If it is left in the slow mode for more than 5 min-
utes, the unit will automatically go into the stop
mode.
TV/VCR
VERTICAL HOLD CONTROL
In the pause/still mode only, when the picture begins
to vibrate vertically, stabilize the picture by using
[CH.
K
/
L
].
NOTE:
If there are video noise lines on the screen, refer to
TRACKING ADJUSTMENT on this page.
TV/VCR
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sylvania 6724DF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sylvania 6724DF in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info